Frymaster BIGLA30 warranty M3000 COMPUTER INSTRUCTIONS, 4.1M3000 General Information, Fr Fries

Pressing product buttons 3 or 9 displays McChick.

Pressing either cook cycle button under the McChick displays launches a cook cycle.

BIGLA30 SERIES GEN II LOV™ GAS FRYER

CHAPTER 4: M3000 COMPUTER INSTRUCTIONS

Cook Channel

and Selection

Buttons

Filter, Temp, Info,

Programming and

Navigation Buttons

FR FRIES FR FRIES

Heat

Indicator

Lamp

ON/OFF

ON/OFF

Product Buttons

4.1M3000 General Information

Welcome to the M3000, a computer that retains the one-button ease of the M2000 and 100B and the utility of 40-product menu capability. The computer is easy to use. One button push starts a cook cycle for an item cooked in a dedicated vat. The same flexible computer on a multi-product vat requires only two button pushes to

launch a cook cycle. Just choose a menu item on a product button and press, and then press a cook channel button under the display showing the desired item. The computer can move seamlessly from McNuggets to Crispy Chicken to any added menu item.

In a typical store setting, the M3000s on the three-vat fry station display FR FRIES (shown above) and will launch a cook cycle with one push of a cook channel button. On the chicken/filet station, the LED display shows dashed lines. To launch a cook cycle, press a product button and then press the cook channel button that corresponds with the location of the

dropped basket. By pressing the product button for McChicken, McChick will appear in the display. Just press the cook channel button corresponding to the location of the appropriate dropped basket.

The M3000 will operate with electric and gas fryers, both full- and split-vat.

4-1