where license-signatureis the complete COD license key.

4.Verify that the license key was removed from the license database by typing the showcodlicense -rcommand.

The COD RTU license key that you deleted should not be listed in the showcodlicense output. See “To Display COD License Status” on page 87.

▼To Reserve Licenses for Allocation

You need to reserve licenses only if you want to make sure a specific number of COD licenses are allocated to a particular domain.

1.Log in to the XSCF console with platadm privileges.

2.Type the setcod command.

You can use one of two methods, as follows.

■Use setcod command with the -ddomain_id and the license_quantity options:

XSCF> setcod -ddomain_id license_quantity

For example:

XSCF> setcod -d 1 4

■Use the setcod command with no options.

This option allows you to reserve licenses for all domains at once. First, the number of available licenses (8 in the example below) and the headroom quantity prompt are displayed:

XSCF> setcod

COD

---

PROC RTUs installed: 8

PROC Headroom Quantity (0 to disable, 4 MAX) [0]:

a.Enter a headroom number or press Return to leave the headroom unchanged.

The following prompts are displayed, in order:

PROC RTUs reserved for domain 0 (6 MAX) [0]:

PROC RTUs reserved for domain 1 (6 MAX) [2]:

PROC RTUs reserved for domain 2 (4 MAX) [0]:

PROC RTUs reserved for domain 3 (4 MAX) [0]:

84 SPARC Enterprise Mx000 Servers Administration Guide • November 2007