2. Type the showsnmpvacm command:

XSCF> showsnmpvacm

Command output example is:

XSCF> showsnmpvacm

 

 

Groups

 

 

 

Groupname

Username

 

 

=============

=============

 

 

admin

jsmith, bob

 

 

Views

 

 

 

View

Subtree

Mask

Type

=============

=======

======

=========

all_view

.1

ff

include

Access

 

 

 

View

Group

 

 

=============

=============

 

 

all_view

admin

 

 

 

 

 

 

▼To Configure the SNMP Agent to Send Version 3 Traps to Hosts

1.Log in to the XSCF console with platadm privileges.

2.Type the setsnmp command:

XSCF> setsnmp addv3traphost -uusername -rauthentication_protocol {-nengine_id -i}[-aauthentication_password] [-eencryption_password] [-ptrap_port] traphost

where username is a user known to the SNMP agent, authentication_protocol is either MD5 or SHA, engine_id is the identifier of the local agent sending the trap, which must match the engine_id expected by the host, -iasks for acknowledgement from the receiving host, authentication_password is the authentication password (must be equal to or greater than 8 characters),

40 SPARC Enterprise Mx000 Servers Administration Guide • November 2007