encryption_password is the encryption password, trap_port is the listening port for the SNMP agent (the default is 161), and traphost is the host name where the SNMP manager application is running.
If you do not specify the passwords, you are prompted to enter them.
3. To verify the operation, type the showsnmp command.
For additional options with the setsnmp command, including information on configuring your system to accept SNMP version 1 or 2 traps, refer to the setsnmp(8) man page.
▼To Enable the SNMP Agent1.Log in to the XSCF console with platadm privileges.
2.Type the setsnmp command:
XSCF> setsnmp enable
3. To verify the operation, type the showsnmp command.
Make sure that your SNMP manager application can communicate with the Service Processor SNMP agent based on the configuration you used for the agent, namely, user, port, and trap information.
▼To Display SNMP Agent Configuration1. Log in to the XSCF console with platadm or platop privileges.
Chapter 3 System Configuration | 41 |