2. Type the setsnmpvacm command:

XSCF> setsnmpvacm createview -sOID_subtree [-mOID_Mask] viewname

where OID_subtree is the MIB OID subtree for the view (values start at .1 for the entire MIB tree, and can be limited to certain portions of the tree by using the optional OID_Mask), and viewname is the name of the view to create for the SNMP agent exported MIB information. View access is read-only for the agent.

3.To verify the operation, type the showsnmpvacm command.

▼To Give a VACM Group Access to a VACM View

1.Log in to the XSCF console with platadm privileges.

2.Type the setsnmpvacm command:

XSCF> setsnmpvacm createaccess -rviewname groupname

where viewname is a valid SNMP agent view, and groupname is a valid SNMP agent group name.

3.To verify the operation, type the showsnmpvacm command.

▼To Display VACM Information for the SNMP Agent

1.Log in to the XSCF console with platadm or platop privileges.

Chapter 3 System Configuration

39