▼To Enable or Disable the Service Processor Telnet Service

1.Log in to the XSCF console with platadm privileges.

2.Optionally, display the current status of the Service Processor Telnet Service:

XSCF> showtelnet

3. Type the settelnet command:

XSCF> settelnet -c function

where function is either enable or disable. The Telnet service starts immediately after being enabled, and stops immediately after being disabled.

▼To Configure the Service Processor SMTP Service

1.Log in to the XSCF console with platadm privileges.

2.Optionally, display the current status of the Service Processor SMTP Service:

XSCF> showsmtp

3. Type the setsmtp command:

XSCF> setsmtp

You are prompted to enter the name of the SMTP mail server to be used, the port number to be used (default is port 25), the authentication mechanism (default is none) and the Reply Address. You must specify a valid email address.

▼To Enable or Disable the Service Processor SSH Service

1.Log in to the XSCF console with platadm privileges.

2.Optionally, display the current status of the Service Processor SSH Service:

XSCF> showssh

Chapter 3 System Configuration

43