2. Type the showsnmp command:

XSCF> showsnmp

Command output example is:

XSCF> showsnmp

 

 

 

 

Agent Status:

Enabled

 

 

Agent Port:

 

161

 

 

 

System Location:

Unknown

 

 

System Contact:

Unknown

 

 

System Description: Unknown

 

 

Trap Hosts:

 

 

 

 

 

Hostname

Port

Type

Community String

Username

Auth Protocol

--------

----

----

----------------

--------

------------

host1

162

v3

n/a

user1

SHA

SNMP V1/V2c:

None

 

 

 

 

 

 

 

 

 

▼To Enable or Disable the Service Processor HTTPS Service

1.Log in to the XSCF console with platadm privileges.

2.Optionally, display the current status of the Service Processor HTTPS Service:

XSCF> showhttps

3. Type the sethttps command:

XSCF> sethttps -c function

where function is either enable or disable. The HTTPS service starts immediately after being enabled, and stops immediately after being disabled.

For additional options with the sethttps command, including information on certificates and private keys, refer to the sethttps(8) man page or to the SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF User’s Guide.

42 SPARC Enterprise Mx000 Servers Administration Guide • November 2007