■To Set the Timezone, Daylight Saving Time, Date, and Time Locally on the Service Processor

■To Create a USM User Known to the SNMP Agent

■To Display USM Information for the SNMP Agent

■To Create a VACM Group

■To Create a VACM View

■To Give a VACM Group Access to a VACM View

■To Display VACM Information for the SNMP Agent

■To Configure the SNMP Agent to Send Version 3 Traps to Hosts

■To Enable the SNMP Agent

■To Display SNMP Agent Configuration

■To Enable or Disable the Service Processor HTTPS Service

■To Enable or Disable the Service Processor Telnet Service

■To Configure the Service Processor SMTP Service

■To Enable or Disable the Service Processor SSH Service

■To Generate a Host Public Key for SSH Service

Note – You can use the setupplatform(8) command rather than the following steps to perform network installation tasks. For more information, see the setupplatform(8) man page.

▼To Configure the DSCP Network

1.Log in to the XSCF console with platadm or fieldeng privileges.

2.Type the setdscp command.

You can use one of two methods, as follows:

■Use the setdscp command with the -y-iaddress -mnetmask options:

XSCF> setdscp -y -i address -m netmask

For example:

XSCF> setdscp -y -i 10.1.1.0 -m 255.255.255.0

28 SPARC Enterprise Mx000 Servers Administration Guide • November 2007