3. Type the setssh command:

XSCF> setssh -c function

where function is either enable or disable. You must generate a host public key to use SSH.

▼To Generate a Host Public Key for SSH Service

1.Log in to the XSCF console with platadm privileges.

2.Type the setssh command:

XSCF> setssh -c genhostkey

For additional options with the setssh command, including information on adding or deleting user public keys, refer to the setssh(8) man page or to the SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF User’s Guide.

▼To Set the Altitude on the Service Processor

1.Log in to the XSCF console with fieldeng privileges.

2.Type the setaltitude command:

XSCF> setaltitude -s altitude=value

where value is a unit of meters. The unit of meters is rounded off to the nearest hundred meters.

3. To verify the operation, type the showaltitude command.

44 SPARC Enterprise Mx000 Servers Administration Guide • November 2007