Fujitsu M4000, M5000, M8000, M9000 ▼To Log in Initially to the XSCF Console

▼To Log in Initially to the XSCF Console

This procedure can be used for initial login or for lost password access.

1.Log in to the XSCF console with the default login name from a terminal device connected to the Service Processor1. You must have physical access to the system.

serial port log-in prompt: default

You are prompted to toggle the Operator Panel MODE switch (keyswitch) on the front of the system. The location of the MODE switch on a midrange server is shown in FIGURE 2-1. The MODE switch on a high-end server is mounted horizontally rather than vertically, as shown in FIGURE 2-2. The MODE switch has two positions: Service and Locked.

1.For details on serial port connections, see the Installation Guide for your server or the SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF User’s Guide.

12 SPARC Enterprise Mx000 Servers Administration Guide • November 2007