1.2 GigabitEthernet card Specifications
1.2 GigabitEthernet card Specifications
The FUJITSU PCI GigabitEthernet card is an adapter that is installed into a PCI slot or a PCI Express slot.
1.2.1 Specifications
The specification of the FUJITSU PCI GigabitEthernet adapter is listed in "Table 1.2.1 PCI GigabitEthernet Card Specification" and "Table 1.2.2 PCI Express GigabitEthernet Card Specification".
Table 1.2.1 PCI GigabitEthernet Card Specification
Item | Compatibility | |
|
| |
Host Bus Interface | PCI Local Bus Revision 2.1 or later | |
|
| |
| ||
Network Interface | ||
LAN) | ||
| ||
| ||
|
| |
Host Data Transfer | ||
|
| |
Bus Type | One PCI slot per card. | |
|
| |
Power Requirements | Maximum: 4.7W(PW008GE4/5, PW0G8GE1/2), 14.0W(PW008QG1) | |
|
| |
| ||
| ||
Connections | ||
| LAN, PW008QG1): Cat5e Cable (Cat5 cable can also be used for | |
| 10/100Mbps.) | |
|
|
Table 1.2.2 PCI Express GigabitEthernet Card Specification
Item |
| Compatibility | |
|
| ||
Host Bus Interface | PCI Express 1.0a (SE0X7GD1X, SE0X7GD2X) | ||
PCI Express 1.1 | (SE0X7GQ1X) | ||
| |||
|
| ||
| |||
Network Interface | |||
| |||
|
| ||
Host Data Transfer | SE0X7GD1X, SE0X7GD2X: PCI Express 4lane Bus Mastering DMA Transfers | ||
SE0X7GQ1X: | PCI Express 8lane Bus Mastering DMA Transfers | ||
| |||
|
| ||
Bus Type | One PCI slot per card. | ||
|
| ||
Power Requirements | Maximum: 9.1W(SE0X7GD1X), 9.2W(SE0X7GD2X), 15.0W(SE0X7GQ1X) | ||
|
| ||
| |||
| |||
| |||
Connections | (A card side is LC. It is used when connection place partner | ||
equipment is SC.), | |||
| |||
| |||
| |||
| Cat5e Cable (Cat5 cable can also be used for 10/100Mbps.) | ||
|
|
|
● PW008GE4, PW0G8GE1 and SE0X7GD2X only supports full duplex connection.
3