Manuals / Brands / Computer Equipment / Network Card / Fujitsu / Computer Equipment / Network Card

Fujitsu PCI GigabitEthernet 3.0 Appendix C Using GigabitEthernet in a Cluster, Environment, Cluster Environment Support, C.2 Cluster Environment Setup Procedure

1 115

Download 115 pages, 3.7 Mb

Support Status

Supported

Supported

Supported (version 2.0.1 and later)

Support Status

Supported

Supported (version 4.1A10 and later)

Supported (version 4.1A10 and later)

Appendix C Using GigabitEthernet in a Cluster

			Environment


		This Appendix outlines the supported functions and setup procedure for the FUJITSU PCI
		GigabitEthernet 3.0 interface when used in a cluster environment.

	C.1	Cluster Environment Support

		The FUJITSU PCI GigabitEthernet 3.0 adapter supports the following cluster features:
		●	Operation standby mode
		●	1:n operation standby mode
		●	Mutual standby mode
		●	TCP/IP communication (public LAN)
		●	Use of a VLAN interface by SynfinityCluster private LAN or PRIMECLUSTER cluster
			interconnect cannot be performed.
		●	A JumboFrame function can be used in SynfinityCluster private LAN or PRIMECLUSTER
			cluster interconnect. When you change MTU size from a default value (9000), please
			set up by the fjgi.conf file. For details, please refer to "Method 3: How to specify
			by fjgi.conf" of "3.3.2 JumboFrame Setup".

The following table shows the supported failover mode with the FUJITSU PCI GigabitEthernet interfaces in a cluster system.

● SynfinityCluster

Failover Mode

IP address

MAC address

IP address + MAC address

● PRIMECLUSTER

Failover Mode

IP address

MAC address

IP address + MAC address

C.2 Cluster Environment Setup Procedure

Set up the cluster environment in the same way as for an Ethernet driver (i.e. hme driver). Follow "Setting up the Network" in the SynfinityCluster manual or PRIMECLUSTER manual. Note that the GigabitEthernet driver resource name is "fjgi".

71

Contents

Page For Safe Operation Revision History Preface Page Contents Contents Chapter 1 Product Outline 1.1 Key Features Table 1.1 GigabitEthernet function 1.2 GigabitEthernet card Specifications 1.2.1 Specifications Table 1.2.1 PCI GigabitEthernet Card Specification Table 1.2.2 PCI Express GigabitEthernet Card Specification 1.2.2 Part Names and Features of Hardware Page Page Page Page Chapter 2 Installing FUJITSU PCI GigabitEthernet Card 2.1 Installation of the GigabitEthernet Card 2.2 Identifying the GigabitEthernet Card 2.3 Cable Connection Figure 2.3.1 PW008GE4 (with Optical Fiber Cable) Figure 2.3.2 PW008GE5 (with Twisted Pair Cat5E Cable) Figure 2.3.3 PW0G8GE1 (with Optical Fiber Cable) Figure 2.3.4 PW0G8GE2 (with Twisted Pair Cat5E Cable) Figure 2.3.5 SE0X7GD2X (with Optical Fiber Cable) Figure 2.3.6 SE0X7GD1X (with Twisted Pair Cat5E Cable) Figure 2.3.7 PW008QG1 (with Twisted Pair Cat5E Cable) Figure 2.3.8 SE0X7GQ1X (with Twisted Pair Cat5E Cable) Page Chapter 3 Setting Configuration Information 3.1 Driver Software Installation 3.2 Environment Setting 3.2.1Configuring the Hostname File 3.2.2Hostname Definition Page 3.2.3 Netmask Value Definition 3.3 Operation Mode Setup 3.3.1 The fjgi.conf File [Parameter Setting] device node of device tree driver name PRIMEPOWER250/450 PW008GE5 PW008GE4 Page 3.3.2 JumboFrame Setup [Method 3: How to specify by fjgi.conf] 3.3.3The ndd Utility parameter status meaning Page Page 3.3.4FCode Settings Page [Returning to Default FCode Settings] 3.4 Discernment Of the GigabitEthernet Interface or GP7000 family 3.4.2 Discernment Of the GigabitEthernet Interface on SPARC Enterprise 3.4Discernment Of the GigabitEthernet Interface 3.5 Network Installation 3.5 Network Installation Page 3.6 VLAN Interface Setup 3.6.1 IEEE 802.1Q TagVLAN Description 3.6.2 Setting Up the VLAN Interface fjgi231003 VLAN interface number = VLAN ID * 1000 + physical instance number Chapter 4 LinkAggregation Feature 4.1 About LinkAggregation Feature Table 4.1.1 Requirements Table 4.1.2 Data Distribution Mode 4.2 Configuration of the LinkAggregation Feature 4.2.1Setting Up the /etc/opt/FJSVla/config File 4.2 Configuration of the LinkAggregation Feature 4.2.2 Using the /etc/opt/FJSVla/bin/fjla Command 4.2.2.2 Inactivate a LinkAggregation Group (fjla term) - Description 4.2.2.3 Display Status and Statistics (fjla stat) - Display Format 4.3 Notes Chapter 5 Troubleshooting Page Appendix A Messages A.1 Console Messages Table A.1.1 Console Messages of the FUJITSU PCI GigabitEthernet driver Appendix A Messages Master Slave Page Table A.1.2 Machine Administration Reported Messages A.2 Command Messages Table A.2 Command Message Page Appendix B On-BoardDiagnostics ACT LED - Location of the LEDs(PW0G8GE1/SE0X7GD2X) - Meaning of the LEDs(PW0G8GE1/SE0X7GD2X) LINK LED - Location of the LEDs(PW0G8GE2) Figure B.5 10/100/1000Base-T(PW0G8GE2) - Meaning of the LEDs(PW0G8GE2) Appendix B On-BoardDiagnostics - Location of the LEDs(SE0X7GD1X) Figure B.6 10/100/1000Base-T* 2ports (SE0X7GD1X) - Meaning of the LEDs(SE0X7GD1X) - Location of the LEDs(PW008QG1/SE0X7GQ1X) Figure B.7 1000Base-T* 4ports (PW008QG1) Figure B.8 1000Base-T* 4ports (SE0X7GQ1X) Page Appendix C Using GigabitEthernet in a Cluster Environment Cluster Environment Support C.2 Cluster Environment Setup Procedure C.3 Notes Appendix D PCI Slot Number and Device Name Table D.1 Slot Number and Device Name Matrix Page Page Page Page Page Page Board Number; Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Appendix E Available Switches Table E.1 With FUJITSU PCI GigabitEthernet 3.0 (PW008GE4/PW0G8GE1/SE0X7GD2X) Table E.2 With FUJITSU PCI GigabitEthernet (PW008GE5/PW0G8GE2/SE0X7GD1X/PW008QG1/SE0X7GQ1X and PRIMEPOWER250/450 secondary LAN port) Table E.4 IEEE802.3 LinkAggregation capable switches