3.5 Network Installation

# cd /cdrom/cdrom0/FJSVgid_3.0/<Solaris Level of client system>

# ls FJSVgid*

FJSVgid.us FJSVgidx.us FJSVgidr.us FJSVgidad.us

# pkgadd -Rmini_root_directory -d .

# cd /

NOTE: In this example, the installation server is setup to install Solaris 8 OS on the client. Substitute the appropriate Solaris level in the pkgadd command for other Solaris OS levels.

● When PW008QG1 is used, please apply the following required patch to the install image in the install server.

Solaris 8 OS : 114536-11 or later

Solaris 9 OS : 114994-11 or later

Solaris 10 OS : 120462-04 or later

● When PW0G8GE1 or PW0G8GE2 is used, please apply the following required patch to the install image in the install server.

Solaris 8 OS : 114536-12 or later

Solaris 9 OS : 114994-12 or later

Solaris 10 OS : 120462-05 or later

# cd /cdrom/cdrom0/FJSVgid_3.0/<Solaris level of client system>

# patchadd -C mini_root_directory <Patch-ID>

# cd /

5.Eject the "FUJITSU PCI GigabitEthernet 3.0 Update1" CD-ROM from the CD-ROM drive.

6.Shutdown the OS on the client system and confirm that the OpenBoot ok prompt is displayed.

# shutdown -i0 -g0 -y

example) # shutdown -i0 -g0 -y

.......

{shutdown messages are displayed}

.......

ok

7.Search the device path for the FUJITSU PCI GigabitEthernet device with the show-nets command from the ok prompt on the client system.

ok show-nets example) ok show-nets

a)/pci@1f,4000/FJSV,pgtb@5

b)/pci@1f,4000/FJSV,pgsb@4

q) NO SELECTION

Enter Selection, q to quit:

8. From ok prompt, boot the client system using the FUJITSU PCI GigabitEthernet device.

43