A.2 Command Messages

 

 

 

Message

Meaning

Workaround

 

 

 

 

 

There is a possibility of

fjgi_device_check: fjgi_hw_init

An error occurred during

hardware abnormalities.

failed !

initialization of the adapter.

Please replace the

 

 

adapter.

 

 

 

 

 

There is a possibility of

 

The driver could not allocate

the resource shortage or

 

hardware abnormalities.

pci_config_setup_failed

sufficient PCI configuration

Please check the memory

 

space.

 

usage and adapter

 

 

 

 

installation status.

 

 

 

 

The Auto-Negotiation of

Check the transmission

Autonegotiation_failed

mode and the adapter

1000BASE-SX failed.

 

hardware.

 

 

 

 

 

A.2 Command Messages

Messages from the /etc/opt/FJSVla/bin/fjla command are listed in TableA.2 ("XX" indicates user input value.)

Table A.2 Command Message

No

Message

Cause

Workaround

 

 

 

 

 

fjla init: The number of

More than 8 interfaces

Specify less than or equal

 

members (including

1

were specified for an

to 8 interfaces (including

aggregator-interface) is max

 

aggregation group.

aggregator-interface).

 

8.

 

 

 

 

 

 

 

2

FJ LinkAggregation now start.

LinkAggregation has been

There is no problem.

started normally.

 

 

 

 

 

 

 

 

fjla init: "XX" does not

The interface "XX" doesn't

If the interface is fjgi,

3

support the

check the patch level of

support FJ LinkAggregation.

 

LinkAggregation feature.

the driver.

 

 

 

 

 

 

 

 

 

By setting up the physical

 

fjla init: "XX" vlan

VLAN interface "XX" can

interface to use

 

LinkAggregation, the VLAN

4

interface cannot define FJ

not be used for the

interfaces associated with

 

LinkAggregation.

LinkAggregation feature.

 

the physical interface

 

 

 

 

 

 

also use LinkAggregation.

 

 

 

 

 

fjla init: A member interface

The interface specified as

Unplumb all member

5

a LinkAggregation group

interfaces except the

has already been plumbed.

 

member is already plumbed.

aggregator-interface.

 

 

 

 

 

 

 

 

"XX" interface specified

The interface specified as

6

fjla init: "XX" is not plumbed

as an

an aggregator-interface

interface.

aggregator-interface is

must be activated

 

 

 

not activated.

(viewable by ifconfig -a).

 

 

 

 

 

 

The instance number is

Do not specify the same

 

fjla init: Input member is

duplicated in the

instance number in the

7

specified member list

LinkAggregation member

duplicated.

 

(including

list (including

 

 

 

 

aggregator-interface).

aggregator-interface).

 

 

 

 

 

 

 

63