3.3 Operation Mode Setup

 

 

 

 

 

 

Parameter

 

Value

Description

 

 

 

 

 

 

 

 

 

 

Off

Auto-Negotiation is disabled. (Fixed mode)

 

 

 

 

 

 

 

 

 

 

 

Connection speed of 1000, 100, or 10 Mbps is

 

 

 

 

 

set based on negotiation with the remote

 

 

 

 

Auto (default)

device.

LinkSpeed_A

*2

 

 

(This can only be set when

 

 

AutoNegotiation_A=On.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1000

Connect at 1000Mbps.

 

 

 

 

 

 

 

 

 

 

100

Connect at 100Mbps.

 

 

 

 

 

 

 

 

 

 

10

Connect at 10Mbps.

 

 

 

 

 

 

 

 

 

 

 

Indicating that both Full-Duplex and

 

 

 

 

Both (default)

Half-Duplex are being supported.

 

 

 

 

(This can only be set when

DuplexCapabilities_A

*2

 

 

AutoNegotiation_A=On.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Half

Half-Duplex operation is allowed.

 

 

 

 

 

 

 

 

 

 

Full

Full-Duplex operation is allowed.

 

 

 

 

 

 

 

 

 

 

Auto (default)

Flow control is performed according to a setup

 

 

 

 

of partner equipment.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Only flow control from the remote machine is

 

 

 

 

Rem

allowed. Flow control to the remote machine

FlowControl_A

*3

 

 

is not allowed.

 

 

 

 

 

 

 

 

 

 

 

Only flow control from the main unit is

 

 

 

 

LocSend

allowed. Flow control from the remote machine

 

 

 

 

 

is not allowed.

 

 

 

 

 

 

 

 

 

 

None

Flow control is disabled.

 

 

 

 

 

 

 

 

 

 

 

Master or Slave is set based on negotiation

 

 

 

 

Auto (default)

with the remote device.

 

 

 

 

(This can only be set when AutoNegotiation_A=

Role_A

*4

 

 

 

 

 

 

On.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Master

Communication by Master.

 

 

 

 

 

 

 

 

 

 

Slave

Communication by Slave.

 

 

 

 

 

 

fjgi_mtu

*5

 

 

1500 to 9000

MTU size is specified.

 

 

 

 

 

 

*1: When PW008GE5 or PW0G8GE2 is used, it is possible to set name="FJSV,pgtb". When PW008GE4 or PW0G8GE1 is used, it is possible to set name="FJSV,pgsb". It becomes the same meaning as having specified name="fjgi" in both cases.

*2: Parameter is supported on 10/100/1000Base-T (PW008GE5, PW0G8GE2, SE0X7GD1X, PW008QG1, SE0X7GQ1X) adapters and PRIMEPOWER250/450 secondary LAN port.

*3: Parameter is effective only when AutoNegotiation_A=On. When AutoNegotiation_A=Off, with 10/100/1000 Base-T, it becomes FlowControl_A=None. And with 1000 Base-SX, it becomes FlowControl_A=Rem.

*4: Parameter is supported on 10/100/1000Base-T (PW008GE5, PW0G8GE2, SE0X7GD1X, PW008QG1, SE0X7GQ1X) adapters and PRIMEPOWER250/450 secondary LAN port in 1000Mbps mode only.

*5: Parameter is supported only in Solaris 9 or later, and when the following patch for PRIMEPOWER is applied.

In the case of Solaris 9 OS: 114994-13 or later

In the case of Solaris 10 OS: 120462-06 or later

[Parameter Setting]

The following shows how to set the parent and unit-address parameter in the fjgi.conf file. ● Find the fjgi device tree, device node and instance number in the /etc/path_to_inst

27