Fujitsu PCI GigabitEthernet 3.0 41

Chapter 3 Setting Configuration Information

parameter	status			meaning

link_status	Read only	0	: Link down
link_status	Read only	1	: Link up
		1	: Link up

		1000 : 1000Mbps
link_speed	Read only	100		: 100Mbps
		10 : 10Mbps

link_mode	Read only	0	: Half Duplex communication
link_mode	Read only	1	: Full Duplex communication
		1	: Full Duplex communication

autonego	Read only	0	: Auto-Negotiation is Off.
autonego	Read only	1	: Auto-Negotiation is On.
		1	: Auto-Negotiation is On.

		0	: None (flow_control disabled)
flow_control	Read only	1	: LocSend (Can transmit pause frame only)
flow_control	Read only	2	: Rem (Can receive pause frame only)
		2	: Rem (Can receive pause frame only)
		3 : Sym (Can receive and transmit pause frame)

		0	: SX (PW008GE4/PW0G8GE1/SE0X7GD2X)
cardtype	Read only	1	: T (PW008GE5/PW0G8GE2/SE0X7GD1X/
cardtype	Read only			PW008QG1/SE0X7GQ1X,
				PW008QG1/SE0X7GQ1X,
				PRIMEPOWER250/450 secondary LAN port)

instance	Read and write	Instance Number

		10Mbps/FullDuplex Setting
adv_10fdx_cap	Read and write	0 : Invalid
		1	: Valid (Default)

		10Mbps/HalfDuplex Setting
adv_10hdx_cap	Read and write	0 : Invalid
		1	: Valid (Default)

		100Mbps/FullDuplex Setting
adv_100fdx_cap	Read and write	0 : Invalid
		1	: Valid (Default)

		100Mbps/HalfDuplex Setting
adv_100hdx_cap	Read and write	0 : Invalid
		1	: Valid (Default)

		1000Mbps/FullDuplex Setting
adv_1000fdx_cap	Read and write	0 : Invalid
		1	: Valid (Default)

		1000Mbps/HalfDuplex Setting
adv_1000hdx_cap	Read and write	0 : Invalid
		1	: Valid (Default)

		Transmit Pause Frame Setting
adv_pauseTX	Read and write	0 : Invalid
		1	: Valid (Default)

		Receive Pause Frame Setting
adv_pauseRX	Read and write	0 : Invalid
		1	: Valid (Default)

		Auto-Negotiation Setting
adv_autoneg_cap	Read and write	0 : Auto-Negotiation Off (Fixed mode)
		1	: Auto-Negotiation On (Default)

		Role		Setting	(Not	valid	for
		PW008GE4/PW0G8GE1/SE0X7GD2X)
adv_role_cap	Read and write	0 : Slave
		1	: Master
		2	: Auto (Default)

34

Contents

Page For Safe Operation Revision History Preface Page Contents Contents Chapter 1 Product Outline 1.1 Key Features Table 1.1 GigabitEthernet function 1.2 GigabitEthernet card Specifications 1.2.1 Specifications Table 1.2.1 PCI GigabitEthernet Card Specification Table 1.2.2 PCI Express GigabitEthernet Card Specification 1.2.2 Part Names and Features of Hardware Page Page Page Page Chapter 2 Installing FUJITSU PCI GigabitEthernet Card 2.1 Installation of the GigabitEthernet Card 2.2 Identifying the GigabitEthernet Card 2.3 Cable Connection Figure 2.3.1 PW008GE4 (with Optical Fiber Cable) Figure 2.3.2 PW008GE5 (with Twisted Pair Cat5E Cable) Figure 2.3.3 PW0G8GE1 (with Optical Fiber Cable) Figure 2.3.4 PW0G8GE2 (with Twisted Pair Cat5E Cable) Figure 2.3.5 SE0X7GD2X (with Optical Fiber Cable) Figure 2.3.6 SE0X7GD1X (with Twisted Pair Cat5E Cable) Figure 2.3.7 PW008QG1 (with Twisted Pair Cat5E Cable) Figure 2.3.8 SE0X7GQ1X (with Twisted Pair Cat5E Cable) Page Chapter 3 Setting Configuration Information 3.1 Driver Software Installation 3.2 Environment Setting 3.2.1Configuring the Hostname File 3.2.2Hostname Definition Page 3.2.3 Netmask Value Definition 3.3 Operation Mode Setup 3.3.1 The fjgi.conf File [Parameter Setting] device node of device tree driver name PRIMEPOWER250/450 PW008GE5 PW008GE4 Page 3.3.2 JumboFrame Setup [Method 3: How to specify by fjgi.conf] 3.3.3The ndd Utility parameter status meaning Page Page 3.3.4FCode Settings Page [Returning to Default FCode Settings] 3.4 Discernment Of the GigabitEthernet Interface or GP7000 family 3.4.2 Discernment Of the GigabitEthernet Interface on SPARC Enterprise 3.4Discernment Of the GigabitEthernet Interface 3.5 Network Installation 3.5 Network Installation Page 3.6 VLAN Interface Setup 3.6.1 IEEE 802.1Q TagVLAN Description 3.6.2 Setting Up the VLAN Interface fjgi231003 VLAN interface number = VLAN ID * 1000 + physical instance number Chapter 4 LinkAggregation Feature 4.1 About LinkAggregation Feature Table 4.1.1 Requirements Table 4.1.2 Data Distribution Mode 4.2 Configuration of the LinkAggregation Feature 4.2.1Setting Up the /etc/opt/FJSVla/config File 4.2 Configuration of the LinkAggregation Feature 4.2.2 Using the /etc/opt/FJSVla/bin/fjla Command 4.2.2.2 Inactivate a LinkAggregation Group (fjla term) - Description 4.2.2.3 Display Status and Statistics (fjla stat) - Display Format 4.3 Notes Chapter 5 Troubleshooting Page Appendix A Messages A.1 Console Messages Table A.1.1 Console Messages of the FUJITSU PCI GigabitEthernet driver Appendix A Messages Master Slave Page Table A.1.2 Machine Administration Reported Messages A.2 Command Messages Table A.2 Command Message Page Appendix B On-BoardDiagnostics ACT LED - Location of the LEDs(PW0G8GE1/SE0X7GD2X) - Meaning of the LEDs(PW0G8GE1/SE0X7GD2X) LINK LED - Location of the LEDs(PW0G8GE2) Figure B.5 10/100/1000Base-T(PW0G8GE2) - Meaning of the LEDs(PW0G8GE2) Appendix B On-BoardDiagnostics - Location of the LEDs(SE0X7GD1X) Figure B.6 10/100/1000Base-T* 2ports (SE0X7GD1X) - Meaning of the LEDs(SE0X7GD1X) - Location of the LEDs(PW008QG1/SE0X7GQ1X) Figure B.7 1000Base-T* 4ports (PW008QG1) Figure B.8 1000Base-T* 4ports (SE0X7GQ1X) Page Appendix C Using GigabitEthernet in a Cluster Environment Cluster Environment Support C.2 Cluster Environment Setup Procedure C.3 Notes Appendix D PCI Slot Number and Device Name Table D.1 Slot Number and Device Name Matrix Page Page Page Page Page Page Board Number; Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Appendix E Available Switches Table E.1 With FUJITSU PCI GigabitEthernet 3.0 (PW008GE4/PW0G8GE1/SE0X7GD2X) Table E.2 With FUJITSU PCI GigabitEthernet (PW008GE5/PW0G8GE2/SE0X7GD1X/PW008QG1/SE0X7GQ1X and PRIMEPOWER250/450 secondary LAN port) Table E.4 IEEE802.3 LinkAggregation capable switches