Manuals / Brands / Computer Equipment / Network Card / Fujitsu / Computer Equipment / Network Card

Fujitsu PCI GigabitEthernet 3.0 ACT LED, ACT LED, LINK LED, Description, Description, Description, - Meaning of the LEDs(PW0G8GE1/SE0X7GD2X), - Location of the LEDs(PW0G8GE1/SE0X7GD2X)

1 115

Download 115 pages, 3.7 Mb

Appendix B On-Board Diagnostics
	ACT LED indicates the following		operation status.

	ACT LED		Description

	Green lighting	The adapter	is transmitting or receiving network traffic.

	Off	There is no	network traffic.

- Location of the LEDs(PW0G8GE1/SE0X7GD2X)

The following figures show the location of the LEDs.

Figure B.3	Figure B.4
1000Base-SX (PW0G8GE1)	1000Base-SX * 2ports (SE0X7GD2X)

- Meaning of the LEDs(PW0G8GE1/SE0X7GD2X)

LINK LED indicates the following operation status.

	LINK LED		Description

	Green lighting	The adapter is connected to a 1000Mbps network and is in the state
	Green lighting	which can communicate.
		which can communicate.

	Off	The adapter	is not connected to a 1000Mbps network.

	ACT LED indicates the following		operation status.

	ACT LED		Description

	Green lighting	The adapter	is transmitting or receiving network traffic.

	Off	There is no	network traffic.

66

Contents

Page For Safe Operation Revision History Preface Page Contents Contents Chapter 1 Product Outline 1.1 Key Features Table 1.1 GigabitEthernet function 1.2 GigabitEthernet card Specifications 1.2.1 Specifications Table 1.2.1 PCI GigabitEthernet Card Specification Table 1.2.2 PCI Express GigabitEthernet Card Specification 1.2.2 Part Names and Features of Hardware Page Page Page Page Chapter 2 Installing FUJITSU PCI GigabitEthernet Card 2.1 Installation of the GigabitEthernet Card 2.2 Identifying the GigabitEthernet Card 2.3 Cable Connection Figure 2.3.1 PW008GE4 (with Optical Fiber Cable) Figure 2.3.2 PW008GE5 (with Twisted Pair Cat5E Cable) Figure 2.3.3 PW0G8GE1 (with Optical Fiber Cable) Figure 2.3.4 PW0G8GE2 (with Twisted Pair Cat5E Cable) Figure 2.3.5 SE0X7GD2X (with Optical Fiber Cable) Figure 2.3.6 SE0X7GD1X (with Twisted Pair Cat5E Cable) Figure 2.3.7 PW008QG1 (with Twisted Pair Cat5E Cable) Figure 2.3.8 SE0X7GQ1X (with Twisted Pair Cat5E Cable) Page Chapter 3 Setting Configuration Information 3.1 Driver Software Installation 3.2 Environment Setting 3.2.1Configuring the Hostname File 3.2.2Hostname Definition Page 3.2.3 Netmask Value Definition 3.3 Operation Mode Setup 3.3.1 The fjgi.conf File [Parameter Setting] device node of device tree driver name PRIMEPOWER250/450 PW008GE5 PW008GE4 Page 3.3.2 JumboFrame Setup [Method 3: How to specify by fjgi.conf] 3.3.3The ndd Utility parameter status meaning Page Page 3.3.4FCode Settings Page [Returning to Default FCode Settings] 3.4 Discernment Of the GigabitEthernet Interface or GP7000 family 3.4.2 Discernment Of the GigabitEthernet Interface on SPARC Enterprise 3.4Discernment Of the GigabitEthernet Interface 3.5 Network Installation 3.5 Network Installation Page 3.6 VLAN Interface Setup 3.6.1 IEEE 802.1Q TagVLAN Description 3.6.2 Setting Up the VLAN Interface fjgi231003 VLAN interface number = VLAN ID * 1000 + physical instance number Chapter 4 LinkAggregation Feature 4.1 About LinkAggregation Feature Table 4.1.1 Requirements Table 4.1.2 Data Distribution Mode 4.2 Configuration of the LinkAggregation Feature 4.2.1Setting Up the /etc/opt/FJSVla/config File 4.2 Configuration of the LinkAggregation Feature 4.2.2 Using the /etc/opt/FJSVla/bin/fjla Command 4.2.2.2 Inactivate a LinkAggregation Group (fjla term) - Description 4.2.2.3 Display Status and Statistics (fjla stat) - Display Format 4.3 Notes Chapter 5 Troubleshooting Page Appendix A Messages A.1 Console Messages Table A.1.1 Console Messages of the FUJITSU PCI GigabitEthernet driver Appendix A Messages Master Slave Page Table A.1.2 Machine Administration Reported Messages A.2 Command Messages Table A.2 Command Message Page Appendix B On-BoardDiagnostics ACT LED - Location of the LEDs(PW0G8GE1/SE0X7GD2X) - Meaning of the LEDs(PW0G8GE1/SE0X7GD2X) LINK LED - Location of the LEDs(PW0G8GE2) Figure B.5 10/100/1000Base-T(PW0G8GE2) - Meaning of the LEDs(PW0G8GE2) Appendix B On-BoardDiagnostics - Location of the LEDs(SE0X7GD1X) Figure B.6 10/100/1000Base-T* 2ports (SE0X7GD1X) - Meaning of the LEDs(SE0X7GD1X) - Location of the LEDs(PW008QG1/SE0X7GQ1X) Figure B.7 1000Base-T* 4ports (PW008QG1) Figure B.8 1000Base-T* 4ports (SE0X7GQ1X) Page Appendix C Using GigabitEthernet in a Cluster Environment Cluster Environment Support C.2 Cluster Environment Setup Procedure C.3 Notes Appendix D PCI Slot Number and Device Name Table D.1 Slot Number and Device Name Matrix Page Page Page Page Page Page Board Number; Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Appendix E Available Switches Table E.1 With FUJITSU PCI GigabitEthernet 3.0 (PW008GE4/PW0G8GE1/SE0X7GD2X) Table E.2 With FUJITSU PCI GigabitEthernet (PW008GE5/PW0G8GE2/SE0X7GD1X/PW008QG1/SE0X7GQ1X and PRIMEPOWER250/450 secondary LAN port) Table E.4 IEEE802.3 LinkAggregation capable switches