3.3 Operation Mode Setup

Auto-Negotiation off) from Auto-Negotiation mode.

Setup to FCode is effective between OBP (Open Boot Prom).

1)The mode which can be set up on PW008GE4/PW0G8GE1/SE0X7GD2X (1000BASE-SX) is as follows.

Execute the following command to set Full Duplex communication, 1000Mbps. example) ok transfer-speed=1000

2)The mode which can be set up on PW008GE5/PW0G8GE2/SE0X7GD1X/PW008QG1/SE0X7GQ1X and PRIMEPOWER250/450 secondary LAN port is as follows.

—Execute the following command to set Full Duplex communication, 100Mbps.

example) ok transfer-speed=100

—Execute the following command to set Half Duplex communication, 100Mbps.

example) ok transfer-speed=100 example) ok half-duplex

—Execute the following command to set Full Duplex communication, 10bps.

example) ok transfer-speed=10

—Execute the following command to set Half Duplex communication, 10Mbps.

example) ok transfer-speed=10 example) ok half-duplex

●Display the current settings. example) ok .properties

37