Chapter 3 Setting Configuration Information

ok boot /pci@1f,4000/FJSV,pgtb@5

9.Install the Solaris OS.

10.After Solaris OS installation, check whether the FUJITSU PCI GigabitEthernet software has already been installed using the following command.

# pkginfo grep FJSVgid

example) # pkginfo grep FJSVgid

system FJSVgid Fujitsu Gigabit Interface Adapter

system FJSVgidx Fujitsu Gigabit Interface Adapter (64-bit)

If the software has not been installed, install the FUJITSU PCI GigabitEthernet software from the CD-ROM that came with the adapter. Refer to the "Installation Guide FUJITSU PCI GigabitEthernet 3.0 Update1" for more information about installation.

● When you install Solaris 2.6 OS via a network, please be sure to set the value of the "local-mac-address?" parameter of a client system as "false".

44