Manuals / Brands / Computer Equipment / Network Card / Fujitsu / Computer Equipment / Network Card

Fujitsu PCI GigabitEthernet 3.0 1.2.2 Part Names and Features of Hardware, LEDs:, Connection:

1 115

Download 115 pages, 3.7 Mb

Chapter 1 Product Outline

connection is not supported.

● When using 1000Mbps transfer rate with PW008GE5, PW0G8GE2, PRIMEPOWER250/450 secondary LAN port, SE0X7GD1X, PW008QG1 and SE0X7GQ1X, only Auto-Negotiation=On can be used.

1.2.2 Part Names and Features of Hardware

Figure 1.1 to 1.8 shows the appearance of the FUJITSU PCI GigabitEthernet adapters. The part names and features are listed as follows.

Connection:

PW008GE4, PW0G8GE1 and SE0X7GD2X allow optical fibre cable connection, PW008GE5, PW0G8GE2, PRIMEPOWER250/450 secondary LAN port, SE0X7GD1X, PW008QG1 and SE0X7GQ1X allow twisted pair cable connection. See the section "Chapter 2 Installing FUJITSU PCI GigabitEthernet Card" for detailed information.

LEDs:

PW008GE4 (1000BASE-SX) has two LEDs(1000M LED, ACT LED) indicating transmission rate and activity. PW0G8GE1 and SE0X7GD2X (1000BASE-SX) has two LEDs(LINK LED, ACT LED) indicating transmission rate and activity. PW008GE5 and PW0G8GE2 (10/100/1000BASE-T) have four LEDs(1000M LED, 100M LED, 10M LED, ACT LED) indicating 1000Mbps, 100Mbps, 10Mbps, and activity. SE0X7GD1X (10/100/1000BASE-T) have three LEDs(1000M LED, 100M LED, LINK/ACT LED) indicating 1000Mbps, 100Mbps, and activity. PW008QG1 and SE0X7GQ1X (10/100/1000BASE-T) has two LEDs(LINK LED, ACT LED) indicating transmission rate and activity. See "Appendix B On-Board Diagnostics" for detailed information.

4

Contents

Page For Safe Operation Revision History Preface Page Contents Contents Chapter 1 Product Outline 1.1 Key Features Table 1.1 GigabitEthernet function 1.2 GigabitEthernet card Specifications 1.2.1 Specifications Table 1.2.1 PCI GigabitEthernet Card Specification Table 1.2.2 PCI Express GigabitEthernet Card Specification 1.2.2 Part Names and Features of Hardware Page Page Page Page Chapter 2 Installing FUJITSU PCI GigabitEthernet Card 2.1 Installation of the GigabitEthernet Card 2.2 Identifying the GigabitEthernet Card 2.3 Cable Connection Figure 2.3.1 PW008GE4 (with Optical Fiber Cable) Figure 2.3.2 PW008GE5 (with Twisted Pair Cat5E Cable) Figure 2.3.3 PW0G8GE1 (with Optical Fiber Cable) Figure 2.3.4 PW0G8GE2 (with Twisted Pair Cat5E Cable) Figure 2.3.5 SE0X7GD2X (with Optical Fiber Cable) Figure 2.3.6 SE0X7GD1X (with Twisted Pair Cat5E Cable) Figure 2.3.7 PW008QG1 (with Twisted Pair Cat5E Cable) Figure 2.3.8 SE0X7GQ1X (with Twisted Pair Cat5E Cable) Page Chapter 3 Setting Configuration Information 3.1 Driver Software Installation 3.2 Environment Setting 3.2.1Configuring the Hostname File 3.2.2Hostname Definition Page 3.2.3 Netmask Value Definition 3.3 Operation Mode Setup 3.3.1 The fjgi.conf File [Parameter Setting] device node of device tree driver name PRIMEPOWER250/450 PW008GE5 PW008GE4 Page 3.3.2 JumboFrame Setup [Method 3: How to specify by fjgi.conf] 3.3.3The ndd Utility parameter status meaning Page Page 3.3.4FCode Settings Page [Returning to Default FCode Settings] 3.4 Discernment Of the GigabitEthernet Interface or GP7000 family 3.4.2 Discernment Of the GigabitEthernet Interface on SPARC Enterprise 3.4Discernment Of the GigabitEthernet Interface 3.5 Network Installation 3.5 Network Installation Page 3.6 VLAN Interface Setup 3.6.1 IEEE 802.1Q TagVLAN Description 3.6.2 Setting Up the VLAN Interface fjgi231003 VLAN interface number = VLAN ID * 1000 + physical instance number Chapter 4 LinkAggregation Feature 4.1 About LinkAggregation Feature Table 4.1.1 Requirements Table 4.1.2 Data Distribution Mode 4.2 Configuration of the LinkAggregation Feature 4.2.1Setting Up the /etc/opt/FJSVla/config File 4.2 Configuration of the LinkAggregation Feature 4.2.2 Using the /etc/opt/FJSVla/bin/fjla Command 4.2.2.2 Inactivate a LinkAggregation Group (fjla term) - Description 4.2.2.3 Display Status and Statistics (fjla stat) - Display Format 4.3 Notes Chapter 5 Troubleshooting Page Appendix A Messages A.1 Console Messages Table A.1.1 Console Messages of the FUJITSU PCI GigabitEthernet driver Appendix A Messages Master Slave Page Table A.1.2 Machine Administration Reported Messages A.2 Command Messages Table A.2 Command Message Page Appendix B On-BoardDiagnostics ACT LED - Location of the LEDs(PW0G8GE1/SE0X7GD2X) - Meaning of the LEDs(PW0G8GE1/SE0X7GD2X) LINK LED - Location of the LEDs(PW0G8GE2) Figure B.5 10/100/1000Base-T(PW0G8GE2) - Meaning of the LEDs(PW0G8GE2) Appendix B On-BoardDiagnostics - Location of the LEDs(SE0X7GD1X) Figure B.6 10/100/1000Base-T* 2ports (SE0X7GD1X) - Meaning of the LEDs(SE0X7GD1X) - Location of the LEDs(PW008QG1/SE0X7GQ1X) Figure B.7 1000Base-T* 4ports (PW008QG1) Figure B.8 1000Base-T* 4ports (SE0X7GQ1X) Page Appendix C Using GigabitEthernet in a Cluster Environment Cluster Environment Support C.2 Cluster Environment Setup Procedure C.3 Notes Appendix D PCI Slot Number and Device Name Table D.1 Slot Number and Device Name Matrix Page Page Page Page Page Page Board Number; Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Appendix E Available Switches Table E.1 With FUJITSU PCI GigabitEthernet 3.0 (PW008GE4/PW0G8GE1/SE0X7GD2X) Table E.2 With FUJITSU PCI GigabitEthernet (PW008GE5/PW0G8GE2/SE0X7GD1X/PW008QG1/SE0X7GQ1X and PRIMEPOWER250/450 secondary LAN port) Table E.4 IEEE802.3 LinkAggregation capable switches