4.4 Using the ScanSnap Quick Menu
ATTENTION
"iPhoto" option is displayed when iPhoto version 5 or later has been installed on your computer.
Description of the selected action
An illustrated description of each action.
The [Settings] button is displayed when there are required settings to be configured for the selected action.
[Settings] button
This button appears when you place the mouse cursor on the () mark. When you want to change settings for an action, click this button.
The [Settings] buttons are displayed when following actions are selected:
HINT
• Scan to
• Scan to Print (Dpage 119)
"Do not show this menu again" checkbox
If this checkbox is marked, the ScanSnap Quick Menu is not displayed again. The mode used for scanning is switched from Quick Menu Mode to Profile Mode. When you want to use the ScanSnap Quick Menu, mark [Use Quick Menu] on the ScanSnap Manager Menu.
4
ScanSnap the Setting
ScanSnap S300M Operator's Guide |
| 83 |
|