8.2 Cleaning the Inside of the ScanSnap
•Plastic rollers (x 4)
Clean them lightly while rotating the rollers with your finger. Take care not to scratch the
surface of the rollers. Take particular care in cleaning the plastic rollers since black debris on the rollers adversely affect the pickup performance.
Turn on the ScanSnap before cleaning the following locations, and rotate the rollers to clean them thoroughly.
•Feed rollers (x 2)
Clean lightly taking care not to scratch the surface of the rollers. Take particular care in cleaning the feed rollers since black debris on the rollers adversely affect the feed performance.
•Eject rollers (x 2)
Clean lightly taking care not to scratch the surface of the rollers. Take particular care in cleaning the eject rollers since black debris on the rollers adversely affect the feed performance.
Open the ADF and hold down the [SCAN] button for three seconds while the power indica- tor lights in white. This can advance the feed rollers and eject rollers by a certain degree. You can repeat the rotation as long as the ADF is opened. (As a guideline, seven holds of the [SCAN] button make the rollers to rotate one full turn.)
Hold down the [SCAN] button for three seconds.
⇒ The rollers rotate.
8
Care Daily
ATTENTION
Whenever cleaning the feed rollers and eject rollers, keep the Power or USB bus power cable connected to the computer and clean the rollers while the power indicator is lit in white.
ScanSnap S300M Operator's Guide |
| 177 |
|