5.2 Saving Data in the Specified Folder

4.Click the close button in the upper left corner of the window.

⇒ The "ScanSnap Manager - Scan and Save Settings" window closes.

• To start scanning right after selecting the profile, press the [SCAN] button

HINT

on the ScanSnap. Doing so also closes the "ScanSnap Manager - Scan

 

 

and Save Settings".

•Changes you have made in the above procedure take effect from the next time you scan documents using the profile.

For details on how to change settings, refer to "4.3 Saving Scanning Settings" (page 70).

•"Scan to Folder" profile can be selected by selecting "Scan to Folder" in the "Select a Profile" window which pops up when clicking the ScanSnap

Manager icon .

Operation

5. Load the document onto the ScanSnap.

For details, refer to "3.2 Paper Sizes of Documents to be Scanned" (page 39) and "3.3 Loading Documents" (page 41).

6.Press the [SCAN] button .

⇒Scanning is started.

⇒When scanning is complete, the preview window appears.

Operation

7.Verify a scanned image in the preview window.

You can also change file names and destination folders and specify whether to state a path to a destination folder in an e-mail message to notify other members of it.

Window size is scaled up or down by dragging the lower right corner of the "Scan to Folder" window with the mouse cursor. The previewed image is also scaled up or down according to the window size.

5

Actions About

ScanSnap S300M Operator's Guide

 

97