8.1Cleaning the ScanSnap Exterior

Cleaning MaterialsParts No.Remarks

Cleaner F1

PA03950-0352

1 bottle (100ml)

 

 

(*1)

Cleaning Wipe

PA03950-0419

1 pack (24 sheets)

 

 

(*1) (*2)

 

 

 

Lint-free dry cloth

Commercially available (*3)

 

ATTENTION

•Never use paint thinner or other organic solvents.

•During the cleaning, prevent water or moisture from getting inside the ScanSnap.

•Do not use aerosol sprays to clean the ScanSnap. Aerosol sprays cause dirt and dust to enter the ScanSnap, resulting in ScanSnap failure and malfunction, or errors in scanned images.

•It may take long before the cleaner vaporizes if a large quantity is used. When cleaning the ScanSnap parts, dampen a cloth with modest quantities of the cleaner. In addition, wipe off the cleaner completely with a soft lint-free cloth to leave no residue on the surface of the cleaned parts.

Note 1: To purchase cleaning materials, contact the FUJITSU scanner dealer where you purchased the ScanSnap.

Note 2: Pre-moistened with Cleaner F1, Cleaning Wipes are used instead of moistened cloths.

Note 3: Any lint-free cloth can be used.

Cloth

Cleaner F1 or neutral detergent

Paint thinner

174