■Scanning side:

Specify whether to scan in "Duplex Scan" or "Simplex Scan" mode when the [SCAN]

button on the ScanSnap is pressed. By clicking , select either of the above modes.

■Continue scanning after current scan is finished:

If the checkbox is marked, the following message appears after scanning.

To continue scanning, load a document onto the ScanSnap, and then click the [Con-

tinue Scanning] button or press the [SCAN] button on the ScanSnap. To finish scanning, click the [Finish Scanning] button.

*It is possible to continue scanning up to 1,000 pages for one PDF file.

*The size of a PDF file should be 1Gbyte at the maximum.

■[Option] button

Configure other scanning-related settings.

Clicking the [Option] button displays the following window.

•Brightness (Black and White scanning only)

Sets the color density for scanning black-and-white images.

Moving the slider to the left will lighten the scanned image, while moving the slider to the right will darken the scanned image.

*This function is enabled only when the [Color mode] is set to "B&W," or when "Auto Color Detection" is selected and the document is recognized as black- and-white.

60