9.3 Replacing the Pick Roller

4. Rotate the pick roller bushing (left).

Pick roller

Pick roller bushing

Pick roller shaft

5. Remove the pick roller with its shaft.

Slightly pull up the left part of the pick roller shaft (about 5mm), move it towards the left side, and then raise it to remove from the ScanSnap.

9

Consumables Replacing

ATTENTION

Pick roller shaft

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pick roller

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If the area around the pick roller is dirty by paper-powder, it may cause a scanning error. Remove the dirt using a dry cloth moistened with Cleaner F1.

* Do not use water, mild detergent or air-spray.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ScanSnap S300M Operator's Guide

 

187