2. Clean the following locations with a cloth moistened with Cleaner F1.

Pad ASSY

Plastic roller (x4)

Eject roller (x2)

Feed roller (x2)

Pick roller

White sheet (x2)

(Two places)

Glass (x2)

(Two places)

ATTENTION

It may take long before the cleaner vaporizes if a large quantity is used. When cleaning the ScanSnap parts, dampen a cloth with modest quantities of the cleaner. In addition, wipe off the cleaner completely with a soft lint-free cloth to leave no residue on the surface of the cleaned parts.

Turn off the ScanSnap before cleaning the following locations.

•Pad ASSY (x 1)

Remove the dirt on the rubber tabs by wiping downward. When cleaning the Pad ASSY, take care to prevent the cloth from catching on to the metal parts.

•Glass (x 2 located on the ADF and the base unit)

Gently wipe off the dirt and dust from the ADF glass surface.

•White sheets (2 pieces; located on the ADF and opposite side)

White strips along the edge of the ADF glass surface. Gently wipe off dirt and dust from the white sheets.

•Pick roller (x 1)

Wipe to clean the roller while turning it with your finger, be careful not to scratch the sur- face. Take particular care in cleaning the pick roller since black debris on the roller adversely affect the pickup performance.

176