Fujitsu V3.0.0 manual System Condition Display Range, L-Platform System Condition Display

Chapter 3 System Condition

This chapter explains how to monitor system condition.

Note

The following message may be displayed during monitoring of system condition:

The authority error occurred. Closing the browser.

This error occurs if, for example, the same user ID is used to log in from a different client. In this case, log in again correctly.

3.1 System Condition Display Range

The system condition can display the following information for L-Platforms used by a tenant user:

-CPU utilization

-Disk R/W Usage

-Disk R/W count

-Memory usage

-Network usage

Note

For tenants

-The above information is not displayed for L-Servers incorporated in the system using the L-Server import function of this product.

-Disk R/W usage, disk R/W count, memory usage, and network usage are not displayed if the virtualization software is Hyper-V. However, if the dynamic memory setting is enabled, memory usage is displayed.

-Disk R/W usage is not displayed if the virtualization software is RHEL5-Xen.

-Disk R/W usage is not displayed if the virtualization software is RHEL-KVM.

-Network usage is not displayed if the physical L-Server is Linux.

For VM hosts

-Network usage is not displayed if the VM host virtualization software used is either RHEL5-Xen or RHEL-KVM.

3.2 L-Platform System Condition Display

Perform the following steps to display the L-Platform system condition:

1.From the ROR Console, select the System Condition tab. The System Condition window is displayed.

- 12 -