Fujitsu V3.0.0 manual Subscribe to an L-Platform, Subscribe to a New L-Platform, Point, Close link

Point

The Startup page is displayed as the home page of L-Platform. To prevent the Startup page from being displayed as the home page, select the Do not show this window again at startup check box.

-Close link

When Close link is clicked, the confirmation window for closing the window will be displayed. Click Yes on the confirmation window to close the L-Platform window.

Note

-If it becomes impossible to connect by the management server stop and etc. when L-Platform is being operated, the lamp in the menu becomes gray and the message "Not Operating" is displayed. In this case, contact the system administrator. According to the displayed window and the performed operation, an error message like the following may be displayed.

-Failed to get system configuration.

-Failed to get the access right.

4.2 Subscribe to an L-Platform

This section explains how to subscribe to an L-Platform

4.2.1 Subscribe to a New L-Platform

On the Subscription page of L-Platform, the user can subscribe to an L-Platform on the basis of the specification that has been registered.

Two methods are available to subscribe to a new L-Platform. The method to be used is determined by the method of subscription that the Infra administrator department has specified.

-L-Platform Template reconfiguration not possible

Changes to registered L-Platform Templates are not permitted.

-L-Platform Template reconfiguration possible

Changes to registered L-Platform Templates are permitted.

The procedure for each method is shown below.

L-Platform Template Reconfiguration not Possible

Follow the steps below to subscribe to a new L-Platform:

1.Select Subscription on the operation menu of New L-Platformpage. The Subscription page will be displayed.

- 24 -