Fujitsu V3.0.0 manual Display Details on a Disk, Display the L-Platform Details

-Initial PWD button: Confirm the initial password

Depending on the L-Platform settings, the "Initial password" is " ". Sometimes it is displayed as ". The initial password is set after L-Platform deployment.

-Add Patch Information button: Register the patch information

Refer to "4.3.5 Manage Patch Information" for information on registering patch information.

-Delete Patch Information button: Delete the patch information

Refer to "4.3.5 Manage Patch Information" for information on deleting the patch information.

Note

If 'start all' or 'stop all' button is clicked while another user is reconfiguring the L-Platform, the start or stop operation fails with the error code VSYS10051.

If this error occurs when no user is reconfiguring the L-Platform, perform the following operation before starting or stopping all servers.

1.Click the Reconfigure button on the L-Platform Details page.

2.After the following message is displayed, click the 'Obtain the lock on a mandatory basis' button, and then cancel the reconfiguration.

The L-Platform is locked by another user.

After obtaining the lock on a mandatory basis, the operation can be continued.

4.3.3 Display Details on a Disk

Follow the steps below to display the details of a disk located on the virtual server:

1.Display the L-Platform Details page.

Refer to "4.3.2 L-Platform Detailed Information Display" for information on how to display the page.

2.After selecting the virtual server to which the disk is added, select Disk from the list box. The details of the disk will be displayed on the L-Platform Details page.

- 46 -