Furuno FS-5070 manual Station List, Registering stations

8. NBDP PREPARATIONS

8.2Station List

The station list provides for storage of up to 50 stations, one frequency pair (RX and TX) per station. For stations which have more than one frequency pair, you might add a suffix to the station name to denote multiple frequency pairs. For example, station name FURUNO followed by –1, -2, -3, etc. for each frequency pair required.

8.2.1Registering stations

1. Press the function key F5 followed by the 1 key to show the Station Entry screen.

Station Entry

Station List

Create

Change

	Station Set			Up
Station		:	_
ID Code		:
Mode		: ARQ FEC
CH/Table		: Channel		ScanTable

Num/Table:

Station entry screen

On the right-hand side of the screen, Create and Change are shown.

2.Create should be underlined. If it is not, underline it by pressing →, ↑ and the Enter key.

3.The cursor is now choosing Station. Enter station name, using up to 18 characters.

4.Press the ↓ key to choose ID Code. Enter station ID code.

5.Press the ↓ key to choose Mode. Choose communication mode with ← or → among the following:

ARQ: Automatic Retransmission Request

FEC: Forward Error Correction

6.Press the ↓ key to choose CH/Table. Choose Channel or ScanTable as appropriate.

7.Press the ↓ key to choose Num/Table.

8-3