Furuno FS-5070 manual 11-9, System menu Example IB-583, Self test results, Tone test

Setup

Slave Delay

TX/RX MSG Save Edit Before sending

Time System

Time & Date

Window Color

Self Test

11. MAINTENANCE & TROUBLESHOOTING

System

Lock Change Default

8 msec (0- 50 msec)

OFF O N

OFF O N

OFF UTC SMT JST 2006/10/16 10:00:00

System menu (Example: IB-583)

2.Choose Change from Setup.

3.Choose Self Test (at the bottom of the screen).

4.Press the Esc key. The results of the self test are displayed a short time later.

	Selftest
Terminal Unit Test : ver. X.XX		:OK
Main Unit Test	: ver. XX	:OK
Modem Unit Test	: ver. XX	:OK
Radio Unit Test	: ID FS5070	:OK
DSC Unit Test	: ID FS5070	:OK

Printer Unit Test* : Print all character :OK

IB-581/IB-583

Main Termina soft (T-CPU Board) NBDP Modem

X.XX = Version No.

*: "NG" and "Printer not ready" when printer is off or is abnormal.

Self test results

The test results are shown as OK or NG (No Good). For any NG, try the self test again. If it appears again, call for service. When the test is completed, the message “Selftest Completed. Press any key to escape.” Appears.

Tone test

1.Choose Self Test from the System Menu.

2.While pressing and holding down the Shift key, press the ↓ key to show the Tone Test menu.

Tone Test

1:Tone Test 1 (All Char)

2:Tone Test 2 (Fox)

3:Tone Test 3 (Beta)

3.Choose a test and press the Enter key.

4.You may stop a tone test at anytime by pressing the Esc key.

Tone test 1 (All characters)

This test checks for proper transmission of all figures, letters and codes. To conduct the test, call a station in the ARQ or FEC mode. Execute the test, confirming that all characters are transmitted correctly. “Now Testing Tone Test 1” appears during the testing. Since the test is

11-9