Furuno FS-5070 manual 10-14, Sample macrofile for store-and-forward method, Close text prompt

10. NBDP TRANSMITTING, RECEIVING

Procedure for preparing a macrofile for store-and-forward method

You will need a macrofile to enable automatic message transmission by store-and-forward method. After preparing it, save it to a floppy disk for future use.

1.Press function key F1 to display the File menu.

2.Press the 1 key.

3.Prepare macrofile. Below is simple example.

< [1] UNTITLED1 >

@FREE $RRR$

@CALL S:LYNGBY RADIO @WRU

@CASE GA+? @SEND TLX80212345+ @CASE MSG+? @SEND A: \ABC

@SEND KKKK

@CASE GA+?

@SEND BRK+

1Search dot pattern free signal until it is found

2Station name (Example: LYNGBY RADIO) Who are you?

Station identity exchange

3Subscriber's Telex number (in example, 802 is country code of Hong Kong) for store-and-forward method

4Location and name of file message A: ABC

5Request for termination of message

1

2

3

4

5

Sample macrofile for store-and-forward method

4.Press function key F1 to display the File menu.

5.Press the 3 key. The Close Text appears on the display.

close Text

Save File?

(UNTITLED 1)

Yes

No

Close text prompt

10-14