Push the Enter knob to open the TEL NO. menu | Furuno FS-5070

5. ROUTINE MESSAGE CALLING, RECEVING

3.Push the ENTER knob to open the COAST ID menu, and then rotate the ENTER knob to choose MANUAL or SELECT. For SELECT, you can choose an ID from the message file list stored. For MANUAL, key in ID of coast station (seven digits) with the numeric keys and then push the ENTER knob.

Compose msg.

MSG TYPE: PSTN MESSAGE

COAST ID *********

TEL NO. :

COMM MODE: TELEPHONE

	DSC FREQ	:12M-INTL

		GO TO VIEW

4. Push the ENTER knob to open the TEL NO. menu.

Compose msg.

MSG TYPE:			PSTN MESSAGE
COAST ID			: 001234567
	TEL NO.		----------------

COMM MODE

	DSC FREQ		:12M-INTL
			GO TO VIEW

5.Enter telephone no. (up to 16 digits) with the numeric keys and then push the ENTER knob.

6.Push the ENTER knob to open the COMM MODE menu, and then choose the communication mode.

7.Push the ENTER knob.

8.Push the ENTER knob to open the DSC FREQ menu.

Compose msg.		Rotate ENTER knob
		to scroll.

	MSG TYPE	2 MHz
	COAST ID	4 MHz
	COAST ID	6 MHz
	TEL NO.	6 MHz
	TEL NO.	8 MHz

COMM MODE 12 MHz

DSC FREQ

GO TO VIEW

16MHz

18MHz

22MHz

25MHz

9.Rotate the ENTER knob to choose DSC band desired and then push the ENTER knob to open the DSC FREQ menu.

10.Rotate the ENTER knob to choose DSC frequency desired and then push the ENTER knob. The display changes as below.

Compose msg.

MSG TYPE : PSTN MESSAGE

COAST ID : 001234567

TEL NO. : 1234567890123456

COMM MODE : TELEPHONE

DSC FREQ :		12M-INTL

		GO TO VIEW

5-31

Image 91

Furuno FS-5070 manual Push the Enter knob to open the TEL NO. menu, To scroll

Contents

Model FS-5070 00016050112 Important Notice Safety Instructions Iii For IC-302 option operation Distress Alert Message Procedure Distress Cancellation Proc. Select frequency Push Enter Canceling Distress Alert Communicate, via radiotelephone, with the coast station Send cancel msg. by voice on 2182.0 kHz Table of Contents Send calls Viii Menu Operation Nbdp TRANSMITTING, Receiving 11-2 11.111-1 11.2 General FeaturesForeword Xii Xiii Program Number FS-1570 System ConfigurationsStandard configuration is shown with solid line Xiv Terminal Unit FS-2570 FS-5070 Xvi Description of controls PWR/VOL knob Turns the power on/off Adjusts volumeOperational Overview Controls Radiotelephone RT Screen Turning the Power On/OffRadiotelephone RT screen Indication DSC Standby ScreenDSC standby screen Control Unit Dimmer, Contrast Setting Scan FrequenciesLoudspeaker Controls become inoperative Setting for Auto AcknowledgementSystem Characteristics Equipment priority Intercom Automatic setting of working frequency Choosing Class of Emission SSB Radiotelephone Rotate the Enter knob to set band or channel desired Choosing Channel, FrequencyChoosing channel Choosing band and band channel with the Enter knob Entering frequency with the numeric keys Transmitting procedureTransmitting Choosing frequency Condition of the transmitting unit Reducing transmitter power Receiving RF gain sensitivity adjustmentChecking the transmitting power Rotate the Enter to adjust and then push the Enter knob Squelch on/off Receiving AM broadcasting stationsSquelch function Noise blanker High Tension Hazard When Automatic Tuning Fails User Channels Call Description What is DSC?DSC Overview DSC Message Contents of a DSC call Alarm Frequency interval Audio Alarms Receive calls Interpreting Call DisplaysDistress receive call View message Send callsIndividual receive call Received message Compose msg Individual send call Ship in Distress Distress OperationsSending Distress Alert Distress operation overview Distress Operations Received message Twice and then go to step Push the Enter knob to open the Input Type menuPush the Enter knob to open the latitude input window Compose msg Push the Enter knob to open the time input window Communicating by Nbdp Terminal Unit Display changes as below example Distress alert received on MF band Receiving a Distress Alert Action for ship receiving distress alert on MF band Distress alert message received Distress acknowledge message in progress Distress alert received on HF band Agree Action for ships receiving distress alert on HF band Sending the distress relay to coast station on HF band Wait for distress relay acknowledge Push the Enter knob to open the DSC FREQ. Menu Sending distress relay to coast station Sending Distress Relay on Behalf of a Ship in Distress Ship ID in Dist Push the Enter knob to open the Ship ID in Dist window Telephone Distress relay ack message received Press the Cancel key to silence the audio alarmPriority distress Transmit sure? Distress relay coast message in progress Area Circle Sending distress relay to area ships Ship ID in Dist Nature Telephone Distress relay area message in progress Receiving Distress Relay from Coast Station Cancelling Distress Call Distress Cancellation Proc. Select frequency Push Enter Operation overview Routine Message CALLING, ReceivingIndividual Call Sending an individual call NBDP-ARQ Push the Enter knob to open the Priority menu Safety or urgency priority How to Set Working Frequency, ChannelRoutine priority Compose msg How to Set DSC Frequency Able acknowledge message received Press Call key for forced transmission Unable acknowledge call received Able acknowledge call received Sending automatic acknowledge ACK BQ with comply type Able Receiving an individual callNo response! Try calling again? Send Able acknowledge Send Unable acknowledge Manually Unable acknowledge message in progress Sending automatic acknowledge ACK BQ with comply type Unable Manually acknowledging individual call with Able Manually acknowledging individual call with Unable No Reason Reason Busy Sending a group call Group CallPress the 2/DSC key Select Message MHZ Sending message by Nbdp Terminal Unit Receiving a group call Receiving message by Nbdp Terminal Unit Geographical Area Call Area Sending a geographical area call Receiving a geographical area call Geographical Area Sender ID Sending a neutral craft call Neutral Craft Call Receiving a neutral craft call Sending a medical transport call Medical Transport Call 2187.5 Receiving a medical transport call Receiving a Polling Request Press the Cancel key to return to the radiotelephone screenAutomatic reply Manual reply Sending own ship’s position to other station Position CallRequesting other ship’s position Finding position of other station Station ID Automatic reply Cancel call Press the Cancel keyPosition call other ship requests your position Acknowledge message received Manual reply If canceling to send the reply, press the Cancel key Sending a Pstn call, receiving acknowledge back ACK BQ Pstn Call To scroll Push the Enter knob to open the TEL NO. menu Waiting for acknowledgement Then, one of the following displays appears Receiving a Pstn call, sending acknowledge back ACK BQUnable acknowledge message received Shortly thereafter, one of the following messages appears No response! charge information Manual To return to the log selected, press the Cancel key To view the contents of a file, do the followingDeleting log files This page is intentionally left blank Setup Adjusting Handset VolumeMenu Operation User ch entry Noise BlankerSquelch Frequency Registering user channels Push the Enter knob to open the user channel options window Deleting individual user channels Preparing TX MessageDeleting user channels Preparing individual calls Frequency Push the Enter knob to open the Station ID entry window Push the Enter knob to open the file name entry window How to Enter File Name and Number Push the Enter knob to continue Preparing group calls Message 2 MHZ Preparing Pstn calls Preparing test call Editing before sending Sending prepared messagesDeleting send message Sending without modification Printing List of Send Message Files Manual Entry of Position and TimeDeleting all messages After last digit Memory clear Date and Time SettingDate/Time setup Memory Clear Clearing received distress log Clearing received ordinary logClearing transmitted log Restoring to default setting Setting AlarmsClearing user channels Sound setup Sound Setting OFF Hook Setting the Auto ACK Details Sample printouts Printing Messages Distress and safety frequencies Routine frequencies Scan freq setup Key Assignment Key assign setupSpecial Messages Speaker Setting in Off Hook FAX Enable/DisableOperation Timer Off This page is intentionally left blank Turning on the Nbdp System Nbdp System OverviewNbdp terminal unit, printer and keyboard Communication status display Features of the IB-583Description of Equipment Terminal unit Keyboard Keyboard Underline Function Keys, Menu OperationMenu conventions Inverse video Selecting menu items and options Menu overviewSelecting menus File menu Function key description Copy Function key F2 Edit menuUndo Cut Call Station Cancel SendingTimer Operation Function key F3 Operate menu Displays desired calendar month and year. To change year Or month, choose item with ↑ or ↓ key and change settingFunction key F4 Window menu Window menu Scan Entry Timer Operation EntryFunction key F5 Station menu Station Entry TX/RX MSG Save SetupSlave Delay Function key F6 System menu Function key F10 Break Disconnects the line Cursor is choosing Window Color Setup press the Enter key Answerback code entry screen Nbdp PreparationsRegistering Answerback Code & ID Codes Registering answerback code ID code entry screen Registering ID codesMessage for confirmation of code entered If the code is correct, press the Enter key again Registering stations Station List Editing/Deleting stations OK/Cancel promptScanning group list 3 5 0 Timer ProgrammingRegistering timer programs Timer operation entry screen User channel entry screen Editing/Deleting timer programs Scan entry screen Scan Channel GroupsEditing/Deleting user channels Registering scan channel groups Press the Enter key twice Press the ESC key Editing/Deleting scan channel groups How a file is opened Nbdp File OperationsOpening and Closing Files Creating Files Formatting floppy disks Saving a File Close text screen Editing FilesSaving a file Cutting and pasting text Pasting text Copying and pasting textCutting text Highlight Search screen Copy and paste flow diagramSelect all Searching text Replace screen Replacing textGoto line Goto top, Goto bottom Opening a file Switching between filesOpening Files Renaming Files Printing Files Saving a File Under a New NameDeleting Files Real Time Printing Set frequency screen Nbdp TRANSMITTING, ReceivingManual Calling 10-1 Manual calling screen 10-2 Press the 1 key to choose Call Station ARQ Mode Operation10-3 Establishing connection Send file screen 10-4Transmit message by one of the following methods Sending a file stored on a floppy disk Stopping transmission FEC Mode OperationChoosing Receive Mode 10-5 10-6 Communication ExampleCommunications example Table of abbreviations 10-7 Timer operation list Timer OperationEnabling timer operation Command and abbreviation Scanning Stopping timer operation10-9 10-10 Communication BufferPreparing Macrofiles for Automatic Telex Automatic telex overview Registering scan groups Preparations10-11 Registering answerback code Command Function CommandsCommand Parameter Content Commands processed by Danish coast station Lyngby Store-and-forward method Actual procedure for store-and-forward telex10-13 Sample macrofile for store-and-forward method 10-14Close text prompt Sample Dirltx macrofile Dirtlx macrofile10-15 Sample Dirtlx macrofile 10-16 Procedure for Dirtlx 10-17 Automatic Telex using MacrofileBasic procedure Actual procedure Call macro screen 10-18Press the ↓ key to choose a macrofile Press the Enter key Radiotelephone Test Maintenance & Troubleshooting11-1 11-2 Maintenance 11-3 Simple TroubleshootingFS-5070 only Error messages Error Messages11-4 11-5 Replacement of Fuses 11-6 Test Call Do the either way depending on the message shown in step 11-7Test acknowledge message received Nbdp Terminal Unit Maintenance Tone test 11-9System menu Example IB-583 Self test results Tone test 2 Fox 11-10Tone test 3 Beta Menu Tree AppendixAP-1 AP-2 Nbdp terminal unit telex 14. = Ship-to-ship Frequency TablesAP-3 TX kHz RX kHz Remarks File Name AP-4 Custom channels to be programmed by Furuno dealers AP-5 MF band working carrier frequencies ref. US CFR 47 Part AP-6 MF band SSB working carrier frequencies AP-7 MHz ITU SSB carrier frequencies ITU RR Appendix AP-8 AP-9 12/16 ITU SSB carrier frequencies ITU RR Appendix AP-10 18/19, 22, 25/26 ITU SSB carrier frequencies ITU RR Appendix AP-11 MF band telex frequency table Frequency /4 AP-12 ITU Telex frequency /4 AP-13 AP-14 ITU Telex Frequency /4 AP-16 Telex Abbreviations Input sentences IEC Digital Interface IECSentences AP-17 GLL Geographic position latitude/longitude AP-18ZDA Time and date GNS Gnss fix data AP-19 RMC Recommended minimum specific GPS/TRANSIT data AP-20 AP-21 Schematic diagram AP-22 Parts ListTransceiver unit FS-1570T Transceiver unit FS-2570T AP-23 Control unit FS-2571C AP-24 Control unit FS-5070T AP-25 FS-1570T Parts LocationAP-26 AP-27 Transceiver unit FS-2570T AP-28 Transceiver unit FS-5070T Comb AP-29 AP-30 Control unit FS-2571C FS-1570/2570/5070 Specifications of SSB Radiotelephone DSC/WATCH Keeping Receiver DSC/WATCH Receiver FS-5070 Terminal Unit IB-581 FS-1570/2570 Nbdp Function Option Antenna Coupler FS-5070 Antenna Coupler FS-1570/2570 Coating Color Distress relay Index IN-2 0560 Publication No. DOC-1028 0560