Manuals / Furuno / Cell Phone / Cell Phone

Furuno FS-5070 manual Neutral Craft Call, Sending a neutral craft call

Models: FS-5070

1 219

Download 219 pages 18.3 Kb

Page 79

5. ROUTINE MESSAGE CALLING, RECEVING

5.4Neutral Craft Call

The neutral craft call, which contains own ship position and ID, informs all ships that your ship is not a participant in armed conflict. The neutral craft call is necessary the setting on the Setup menu. See section “6.15 Special Messages”.

5.4.1Sending a neutral craft call

1. Press the 2/DSC key.

Select Message

		GENERAL		DISTRESS
		INDIVIDUAL		RELAY AREA
		PSTN MESSAGE		RELAY COAST
		TEST MESSAGE		DISTRESS
		GROUP MESSAGE		DISTRESS
		GROUP MESSAGE
		AREA MESSAGE		SPECIAL
		POSITION		SPECIAL
		MMSI 123456789		UTC 01:53
		POS 12 34.5678N		UTC 01:53
		123 45.6789E		EPFS 01:54

2.Rotate the ENTER knob to choose SPECIAL and NEUTRAL in order and then push the ENTER knob.

3.Push the ENTER knob to open the AREA menu and enter the area range as shown on page 5-16.

4.Push the ENTER knob to open the COM. MODE menu.

5.Rotate the ENTER knob to choose communication type desired (TELEPHONE or NBDP-FEC) and then push the ENTER knob.

6.Push the ENTER knob to open the DSC FREQ menu.

** Compose2187.5

MSG TYPE 4207.5 6312.0

AREA: 44 N	8414.5
	12577.0
PRIORITY
	16804.5
COMM MODE

DSC FREQ	VIEW
	VIEW
	GO TO VIEW

**

kHz

7.Rotate the ENTER knob to choose appropriate frequency and then push the ENTER knob.

Compose msg.

MSG TYPE : NEUTRAL

CRAFT

AREA : 44 N 140 W 10 5

PRIORITY	: URGENCY
COMM MODE	: TELEPHONE
COMM FREQ	: 2182.0 kHz
DSC FREQ	: 2187.5 kHz

GO TO VIEW

5-19

Image 79

Furuno FS-5070 manual Neutral Craft Call, Sending a neutral craft call

Contents

Model FS-5070 00016050112 Important Notice Safety Instructions Iii For IC-302 option operation Distress Alert Message ProcedureDistress Cancellation Proc. Select frequency Push Enter Canceling Distress AlertCommunicate, via radiotelephone, with the coast station Send cancel msg. by voice on 2182.0 kHzTable of Contents Send calls ViiiMenu Operation Nbdp TRANSMITTING, Receiving 11-2 11.111-1 11.2General FeaturesForeword XiiXiii Program NumberFS-1570 System ConfigurationsStandard configuration is shown with solid line XivTerminal Unit FS-2570FS-5070 XviDescription of controls PWR/VOL knob Turns the power on/off Adjusts volumeOperational Overview ControlsRadiotelephone RT Screen Turning the Power On/OffRadiotelephone RT screen Indication DSC Standby ScreenDSC standby screen Control Unit Dimmer, Contrast Setting Scan FrequenciesLoudspeaker Controls become inoperative Setting for Auto AcknowledgementSystem Characteristics Equipment priorityIntercom Automatic setting of working frequencyChoosing Class of Emission SSB RadiotelephoneRotate the Enter knob to set band or channel desired Choosing Channel, FrequencyChoosing channel Choosing band and band channel with the Enter knobEntering frequency with the numeric keys Transmitting procedureTransmitting Choosing frequencyCondition of the transmitting unit Reducing transmitter powerReceiving RF gain sensitivity adjustmentChecking the transmitting power Rotate the Enter to adjust and then push the Enter knobSquelch on/off Receiving AM broadcasting stationsSquelch function Noise blankerHigh Tension Hazard When Automatic Tuning FailsUser Channels Call Description What is DSC?DSC Overview DSC MessageContents of a DSC call Alarm Frequency interval Audio AlarmsReceive calls Interpreting Call DisplaysDistress receive call View message Send callsIndividual receive call Received messageCompose msg Individual send callShip in Distress Distress OperationsSending Distress Alert Distress operation overviewDistress Operations Received message Twice and then go to step Push the Enter knob to open the Input Type menuPush the Enter knob to open the latitude input window Compose msg Push the Enter knob to open the time input windowCommunicating by Nbdp Terminal Unit Display changes as below exampleDistress alert received on MF band Receiving a Distress AlertAction for ship receiving distress alert on MF band Distress alert message received Distress acknowledge message in progress Distress alert received on HF bandAgree Action for ships receiving distress alert on HF bandSending the distress relay to coast station on HF band Wait for distress relay acknowledge Push the Enter knob to open the DSC FREQ. MenuSending distress relay to coast station Sending Distress Relay on Behalf of a Ship in DistressShip ID in Dist Push the Enter knob to open the Ship ID in Dist windowTelephone Distress relay ack message received Press the Cancel key to silence the audio alarmPriority distress Transmit sure? Distress relay coast message in progressArea Circle Sending distress relay to area shipsShip ID in Dist Nature Telephone Distress relay area message in progress Receiving Distress Relay from Coast Station Cancelling Distress CallDistress Cancellation Proc. Select frequency Push Enter Operation overview Routine Message CALLING, ReceivingIndividual Call Sending an individual callNBDP-ARQ Push the Enter knob to open the Priority menuSafety or urgency priority How to Set Working Frequency, ChannelRoutine priority Compose msg How to Set DSC FrequencyAble acknowledge message received Press Call key for forced transmissionUnable acknowledge call received Able acknowledge call receivedSending automatic acknowledge ACK BQ with comply type Able Receiving an individual callNo response! Try calling again? Send Able acknowledge Send Unable acknowledge ManuallyUnable acknowledge message in progress Sending automatic acknowledge ACK BQ with comply type UnableManually acknowledging individual call with Able Manually acknowledging individual call with Unable No Reason Reason Busy Sending a group call Group CallPress the 2/DSC key Select Message MHZ Sending message by Nbdp Terminal Unit Receiving a group callReceiving message by Nbdp Terminal Unit Geographical Area CallArea Sending a geographical area callReceiving a geographical area call Geographical Area Sender ID Sending a neutral craft call Neutral Craft CallReceiving a neutral craft call Sending a medical transport call Medical Transport Call2187.5 Receiving a medical transport call Receiving a Polling Request Press the Cancel key to return to the radiotelephone screenAutomatic reply Manual reply Sending own ship’s position to other station Position CallRequesting other ship’s position Finding position of other stationStation ID Automatic reply Cancel call Press the Cancel keyPosition call other ship requests your position Acknowledge message receivedManual reply If canceling to send the reply, press the Cancel keySending a Pstn call, receiving acknowledge back ACK BQ Pstn CallTo scroll Push the Enter knob to open the TEL NO. menuWaiting for acknowledgement Then, one of the following displays appears Receiving a Pstn call, sending acknowledge back ACK BQUnable acknowledge message received Shortly thereafter, one of the following messages appears No response! charge information Manual To return to the log selected, press the Cancel key To view the contents of a file, do the followingDeleting log files This page is intentionally left blank Setup Adjusting Handset VolumeMenu Operation User ch entry Noise BlankerSquelch Frequency Registering user channelsPush the Enter knob to open the user channel options window Deleting individual user channels Preparing TX MessageDeleting user channels Preparing individual callsFrequency Push the Enter knob to open the Station ID entry windowPush the Enter knob to open the file name entry window How to Enter File Name and NumberPush the Enter knob to continue Preparing group callsMessage 2 MHZ Preparing Pstn calls Preparing test call Editing before sending Sending prepared messagesDeleting send message Sending without modificationPrinting List of Send Message Files Manual Entry of Position and TimeDeleting all messages After last digit Memory clear Date and Time SettingDate/Time setup Memory ClearClearing received distress log Clearing received ordinary logClearing transmitted log Restoring to default setting Setting AlarmsClearing user channels Sound setup Sound SettingOFF Hook Setting the Auto ACK DetailsSample printouts Printing MessagesDistress and safety frequencies Routine frequencies Scan freq setupKey Assignment Key assign setupSpecial Messages Speaker Setting in Off Hook FAX Enable/DisableOperation Timer Off This page is intentionally left blank Turning on the Nbdp System Nbdp System OverviewNbdp terminal unit, printer and keyboard Communication status display Features of the IB-583Description of Equipment Terminal unitKeyboard KeyboardUnderline Function Keys, Menu OperationMenu conventions Inverse videoSelecting menu items and options Menu overviewSelecting menus File menuFunction key description Copy Function key F2 Edit menuUndo CutCall Station Cancel SendingTimer Operation Function key F3 Operate menuDisplays desired calendar month and year. To change year Or month, choose item with ↑ or ↓ key and change settingFunction key F4 Window menu Window menuScan Entry Timer Operation EntryFunction key F5 Station menu Station EntryTX/RX MSG Save SetupSlave Delay Function key F6 System menuFunction key F10 Break Disconnects the line Cursor is choosing Window Color Setup press the Enter keyAnswerback code entry screen Nbdp PreparationsRegistering Answerback Code & ID Codes Registering answerback codeID code entry screen Registering ID codesMessage for confirmation of code entered If the code is correct, press the Enter key againRegistering stations Station ListEditing/Deleting stations OK/Cancel promptScanning group list 3 5 0 Timer ProgrammingRegistering timer programs Timer operation entry screenUser channel entry screen Editing/Deleting timer programsScan entry screen Scan Channel GroupsEditing/Deleting user channels Registering scan channel groupsPress the Enter key twice Press the ESC key Editing/Deleting scan channel groupsHow a file is opened Nbdp File OperationsOpening and Closing Files Creating FilesFormatting floppy disks Saving a FileClose text screen Editing FilesSaving a file Cutting and pasting textPasting text Copying and pasting textCutting text HighlightSearch screen Copy and paste flow diagramSelect all Searching textReplace screen Replacing textGoto line Goto top, Goto bottomOpening a file Switching between filesOpening Files Renaming FilesPrinting Files Saving a File Under a New NameDeleting Files Real Time PrintingSet frequency screen Nbdp TRANSMITTING, ReceivingManual Calling 10-1Manual calling screen 10-2Press the 1 key to choose Call Station ARQ Mode Operation10-3 Establishing connectionSend file screen 10-4Transmit message by one of the following methods Sending a file stored on a floppy diskStopping transmission FEC Mode OperationChoosing Receive Mode 10-510-6 Communication ExampleCommunications example Table of abbreviations 10-7Timer operation list Timer OperationEnabling timer operation Command and abbreviationScanning Stopping timer operation10-9 10-10 Communication BufferPreparing Macrofiles for Automatic Telex Automatic telex overviewRegistering scan groups Preparations10-11 Registering answerback codeCommand Function CommandsCommand Parameter Content Commands processed by Danish coast station LyngbyStore-and-forward method Actual procedure for store-and-forward telex10-13 Sample macrofile for store-and-forward method 10-14Close text prompt Sample Dirltx macrofile Dirtlx macrofile10-15 Sample Dirtlx macrofile10-16 Procedure for Dirtlx10-17 Automatic Telex using MacrofileBasic procedure Actual procedureCall macro screen 10-18Press the ↓ key to choose a macrofile Press the Enter key Radiotelephone Test Maintenance & Troubleshooting11-1 11-2 Maintenance11-3 Simple TroubleshootingFS-5070 only Error messages Error Messages11-4 11-5 Replacement of Fuses11-6 Test CallDo the either way depending on the message shown in step 11-7Test acknowledge message received Nbdp Terminal Unit Maintenance Tone test 11-9System menu Example IB-583 Self test resultsTone test 2 Fox 11-10Tone test 3 Beta Menu Tree AppendixAP-1 AP-2 Nbdp terminal unit telex14. = Ship-to-ship Frequency TablesAP-3 TX kHz RX kHz Remarks File NameAP-4 Custom channels to be programmed by Furuno dealersAP-5 MF band working carrier frequencies ref. US CFR 47 PartAP-6 MF band SSB working carrier frequenciesAP-7 MHz ITU SSB carrier frequencies ITU RR AppendixAP-8 AP-9 12/16 ITU SSB carrier frequencies ITU RR AppendixAP-10 18/19, 22, 25/26 ITU SSB carrier frequencies ITU RR AppendixAP-11 MF band telex frequency tableFrequency /4 AP-12ITU Telex frequency /4 AP-13AP-14 ITU Telex Frequency /4 AP-16 Telex AbbreviationsInput sentences IEC Digital Interface IECSentences AP-17GLL Geographic position latitude/longitude AP-18ZDA Time and date GNS Gnss fix data AP-19RMC Recommended minimum specific GPS/TRANSIT data AP-20AP-21 Schematic diagramAP-22 Parts ListTransceiver unit FS-1570T Transceiver unit FS-2570T AP-23Control unit FS-2571C AP-24Control unit FS-5070T AP-25FS-1570T Parts LocationAP-26 AP-27 Transceiver unit FS-2570TAP-28 Transceiver unit FS-5070TComb AP-29AP-30 Control unit FS-2571CFS-1570/2570/5070 Specifications of SSB RadiotelephoneDSC/WATCH Keeping Receiver DSC/WATCH Receiver FS-5070 Terminal Unit IB-581 FS-1570/2570 Nbdp Function OptionAntenna Coupler FS-5070 Antenna Coupler FS-1570/2570Coating Color Distress relay IndexIN-2 0560 Publication No. DOC-1028 0560