Furuno FS-5070 manual Copying and pasting text, Cutting text, Highlight, Pasting text

9. NBDP FILE OPERATIONS

Cutting text

1.Place the cursor on the first character of the text to be cut.

2.Highlight the text to be cut by pressing and holding the Shift key while pressing the →. If you highlight text which you do not want to cut, press the ← to adjust the highlight.

<[1]UNTITLED1>

CONGULATULATION ON YOUR CHOICE OF DP-6

INMARSAT B MOBILE EARTH STATION.

WE ARE CONFIDENT THAT YOU WILL ENJOY MANY YEARS OF

OPERATION WITH THIS FINE PIECE OF EQUIPMENT

The highlight

3.Press the function key F2 and the 2 key, or the Delete key. The highlighted text is cut and the remaining text is reformatted.

If you make a mistake, you can restore the text by immediately selecting Undo from the Edit menu.

Pasting text

To paste the cut text to a new location, do the following:

1.Place the cursor at the exact spot in the message where the cut text is to start.

2.Press the function key F2 and the 4 key, or the Insert key.

9.4.2Copying and pasting text

You may copy a portion of text and paste it elsewhere.

1.Choose the text to copy. (See “cutting text” above for the procedure.)

2.Press the function key F2 and the 3 key.

The text selected is copied to the paste buffer memory where the cut or copied text is stored. The display returns to the normal screen.

3.Place the cursor at the exact spot in the message where the copied text is to start.

4.Press the function key F2 and the 4 key.

9-4