Distress alert received on HF band | Furuno FS-5070 specs

4.DISTRESS OPERATIONS

5.Rotate the ENTER knob to choose ACKNOWLEDGE and then push the ENTER knob. The following display appears.

Compose msg.

MSG TYPE	: DISTRESS ACK
SHIP ID IN DIST : 123456789

DSC FREQ	: 2187.5 kHz


		GO TO VIEW


	Compose msg.
	Ack should be
	By Coast Station
	MSG TYPE	: DISTRESS ACK
	CANCEL: CLOSE WINDOW
	SHIP ID IN DIST :		123456789

	DSC FREQ	:	2187.5 kHz


			GO TO VIEW

6. Press the CALL key for three seconds.

The message “Priority distress transmit sure?” appears. Continue to press the key until the message “Distress acknowledge message in progress.” Appears, to transmit the distress acknowledge call to the ship in distress.

Priority distress transmit sure?

SHIP ID IN DIST: 123456789

				CALL key
				pressed
	DSC FREQ :	2187.5 KHZ		pressed
	DSC FREQ :	2187.5 KHZ		3 seconds
	KEEP PRESSED FOR		3S

Distress acknowledge message in progress!

SHIP ID IN DIST : 123456789

DSC FREQ : 2187.5 KHZ

TIME TO GO: 4S

4.2.2Distress alert received on HF band

If you receive a distress alert on the HF band, the ALARM lamp lights and the audio alarm sounds. Press the CANCEL key to silence the audio alarm. Wait for the distress acknowledge from a coast station. If you do not receive the distress acknowledge within five minutes, follow the instructions below to determine your course of action.

•Watch on the distress frequency.

•Relay the distress alert in the following cases:

-You have not received a distress acknowledge call from a coast station within five minutes after receiving a distress call.

-You have not received a distress relay from other ship.

-You cannot receive distress communications from other ship over radiotelephone.

-If it is clear the ship or persons in distress are not in the vicinity and/or other crafts are better placed to assist, superfluous communications which could interfere with search and rescue activities should be avoided. Details should be recorded in the appropriate log book.

-The ship relaying the distress alert should establish communications with the station controlling the distress as directed and render such assistance as required and appropriate.

4-10

Image 48

Furuno FS-5070 manual Distress alert received on HF band, Distress acknowledge message in progress

Contents

Model FS-5070 00016050112 Important Notice Safety Instructions Iii Distress Alert Message Procedure For IC-302 option operation Canceling Distress Alert Distress Cancellation Proc. Select frequency Push Enter Send cancel msg. by voice on 2182.0 kHz Communicate, via radiotelephone, with the coast station Table of Contents Viii Send calls Menu Operation Nbdp TRANSMITTING, Receiving 11.1 11-111.2 11-2 Features ForewordXii General Program Number Xiii System Configurations Standard configuration is shown with solid lineXiv FS-1570 FS-2570 Terminal Unit Xvi FS-5070 PWR/VOL knob Turns the power on/off Adjusts volume Operational OverviewControls Description of controls Turning the Power On/Off Radiotelephone RT ScreenRadiotelephone RT screen DSC Standby Screen IndicationDSC standby screen Setting Scan Frequencies Control Unit Dimmer, ContrastLoudspeaker Setting for Auto Acknowledgement System CharacteristicsEquipment priority Controls become inoperative Automatic setting of working frequency Intercom SSB Radiotelephone Choosing Class of Emission Choosing Channel, Frequency Choosing channelChoosing band and band channel with the Enter knob Rotate the Enter knob to set band or channel desired Transmitting procedure TransmittingChoosing frequency Entering frequency with the numeric keys Reducing transmitter power Condition of the transmitting unit RF gain sensitivity adjustment Checking the transmitting powerRotate the Enter to adjust and then push the Enter knob Receiving Receiving AM broadcasting stations Squelch functionNoise blanker Squelch on/off When Automatic Tuning Fails High Tension Hazard User Channels What is DSC? DSC OverviewDSC Message Call Description Contents of a DSC call Audio Alarms Alarm Frequency interval Interpreting Call Displays Receive callsDistress receive call Send calls Individual receive callReceived message View message Individual send call Compose msg Distress Operations Sending Distress AlertDistress operation overview Ship in Distress Distress Operations Received message Push the Enter knob to open the Input Type menu Twice and then go to stepPush the Enter knob to open the latitude input window Push the Enter knob to open the time input window Compose msg Display changes as below example Communicating by Nbdp Terminal Unit Receiving a Distress Alert Distress alert received on MF band Action for ship receiving distress alert on MF band Distress alert message received Distress alert received on HF band Distress acknowledge message in progress Action for ships receiving distress alert on HF band Agree Sending the distress relay to coast station on HF band Push the Enter knob to open the DSC FREQ. Menu Wait for distress relay acknowledge Sending Distress Relay on Behalf of a Ship in Distress Sending distress relay to coast station Push the Enter knob to open the Ship ID in Dist window Ship ID in Dist Telephone Press the Cancel key to silence the audio alarm Priority distress Transmit sure?Distress relay coast message in progress Distress relay ack message received Sending distress relay to area ships Area Circle Ship ID in Dist Nature Telephone Distress relay area message in progress Cancelling Distress Call Receiving Distress Relay from Coast Station Distress Cancellation Proc. Select frequency Push Enter Routine Message CALLING, Receiving Individual CallSending an individual call Operation overview Push the Enter knob to open the Priority menu NBDP-ARQ How to Set Working Frequency, Channel Safety or urgency priorityRoutine priority How to Set DSC Frequency Compose msg Press Call key for forced transmission Able acknowledge message received Able acknowledge call received Unable acknowledge call received Receiving an individual call No response! Try calling again?Send Able acknowledge Send Unable acknowledge Manually Sending automatic acknowledge ACK BQ with comply type Able Sending automatic acknowledge ACK BQ with comply type Unable Unable acknowledge message in progress Manually acknowledging individual call with Able Manually acknowledging individual call with Unable No Reason Reason Busy Group Call Sending a group callPress the 2/DSC key Select Message MHZ Receiving a group call Sending message by Nbdp Terminal Unit Geographical Area Call Receiving message by Nbdp Terminal Unit Sending a geographical area call Area Receiving a geographical area call Geographical Area Sender ID Neutral Craft Call Sending a neutral craft call Receiving a neutral craft call Medical Transport Call Sending a medical transport call 2187.5 Receiving a medical transport call Press the Cancel key to return to the radiotelephone screen Receiving a Polling RequestAutomatic reply Manual reply Position Call Requesting other ship’s positionFinding position of other station Sending own ship’s position to other station Station ID Cancel call Press the Cancel key Position call other ship requests your positionAcknowledge message received Automatic reply If canceling to send the reply, press the Cancel key Manual reply Pstn Call Sending a Pstn call, receiving acknowledge back ACK BQ Push the Enter knob to open the TEL NO. menu To scroll Waiting for acknowledgement Receiving a Pstn call, sending acknowledge back ACK BQ Then, one of the following displays appearsUnable acknowledge message received Shortly thereafter, one of the following messages appears No response! charge information Manual To view the contents of a file, do the following To return to the log selected, press the Cancel keyDeleting log files This page is intentionally left blank Adjusting Handset Volume SetupMenu Operation Noise Blanker Squelch FrequencyRegistering user channels User ch entry Push the Enter knob to open the user channel options window Preparing TX Message Deleting user channelsPreparing individual calls Deleting individual user channels Push the Enter knob to open the Station ID entry window Frequency How to Enter File Name and Number Push the Enter knob to open the file name entry window Preparing group calls Push the Enter knob to continue Message 2 MHZ Preparing Pstn calls Preparing test call Sending prepared messages Deleting send messageSending without modification Editing before sending Manual Entry of Position and Time Printing List of Send Message FilesDeleting all messages After last digit Date and Time Setting Date/Time setupMemory Clear Memory clear Clearing received ordinary log Clearing received distress logClearing transmitted log Setting Alarms Restoring to default settingClearing user channels Sound Setting Sound setup Setting the Auto ACK Details OFF Hook Printing Messages Sample printouts Distress and safety frequencies Scan freq setup Routine frequencies Key assign setup Key AssignmentSpecial Messages FAX Enable/Disable Speaker Setting in Off HookOperation Timer Off This page is intentionally left blank Nbdp System Overview Turning on the Nbdp SystemNbdp terminal unit, printer and keyboard Features of the IB-583 Description of EquipmentTerminal unit Communication status display Keyboard Keyboard Function Keys, Menu Operation Menu conventionsInverse video Underline Menu overview Selecting menusFile menu Selecting menu items and options Function key description Function key F2 Edit menu UndoCut Copy Cancel Sending Timer OperationFunction key F3 Operate menu Call Station Or month, choose item with ↑ or ↓ key and change setting Function key F4 Window menuWindow menu Displays desired calendar month and year. To change year Timer Operation Entry Function key F5 Station menuStation Entry Scan Entry Setup Slave DelayFunction key F6 System menu TX/RX MSG Save Cursor is choosing Window Color Setup press the Enter key Function key F10 Break Disconnects the line Nbdp Preparations Registering Answerback Code & ID CodesRegistering answerback code Answerback code entry screen Registering ID codes Message for confirmation of code enteredIf the code is correct, press the Enter key again ID code entry screen Station List Registering stations OK/Cancel prompt Editing/Deleting stationsScanning group list Timer Programming Registering timer programsTimer operation entry screen 3 5 0 Editing/Deleting timer programs User channel entry screen Scan Channel Groups Editing/Deleting user channelsRegistering scan channel groups Scan entry screen Editing/Deleting scan channel groups Press the Enter key twice Press the ESC key Nbdp File Operations Opening and Closing FilesCreating Files How a file is opened Saving a File Formatting floppy disks Editing Files Saving a fileCutting and pasting text Close text screen Copying and pasting text Cutting textHighlight Pasting text Copy and paste flow diagram Select allSearching text Search screen Replacing text Goto lineGoto top, Goto bottom Replace screen Switching between files Opening FilesRenaming Files Opening a file Saving a File Under a New Name Deleting FilesReal Time Printing Printing Files Nbdp TRANSMITTING, Receiving Manual Calling10-1 Set frequency screen 10-2 Manual calling screen ARQ Mode Operation 10-3Establishing connection Press the 1 key to choose Call Station 10-4 Transmit message by one of the following methodsSending a file stored on a floppy disk Send file screen FEC Mode Operation Choosing Receive Mode10-5 Stopping transmission Communication Example 10-6Communications example 10-7 Table of abbreviations Timer Operation Enabling timer operationCommand and abbreviation Timer operation list Stopping timer operation Scanning10-9 Communication Buffer Preparing Macrofiles for Automatic TelexAutomatic telex overview 10-10 Preparations 10-11Registering answerback code Registering scan groups Commands Command Parameter ContentCommands processed by Danish coast station Lyngby Command Function Actual procedure for store-and-forward telex Store-and-forward method10-13 10-14 Sample macrofile for store-and-forward methodClose text prompt Dirtlx macrofile 10-15Sample Dirtlx macrofile Sample Dirltx macrofile Procedure for Dirtlx 10-16 Automatic Telex using Macrofile Basic procedureActual procedure 10-17 10-18 Call macro screenPress the ↓ key to choose a macrofile Press the Enter key Maintenance & Troubleshooting Radiotelephone Test11-1 Maintenance 11-2 Simple Troubleshooting 11-3FS-5070 only Error Messages Error messages11-4 Replacement of Fuses 11-5 Test Call 11-6 11-7 Do the either way depending on the message shown in stepTest acknowledge message received Nbdp Terminal Unit Maintenance 11-9 System menu Example IB-583Self test results Tone test 11-10 Tone test 2 FoxTone test 3 Beta Appendix Menu TreeAP-1 Nbdp terminal unit telex AP-2 Frequency Tables AP-3TX kHz RX kHz Remarks File Name 14. = Ship-to-ship Custom channels to be programmed by Furuno dealers AP-4 MF band working carrier frequencies ref. US CFR 47 Part AP-5 MF band SSB working carrier frequencies AP-6 MHz ITU SSB carrier frequencies ITU RR Appendix AP-7 AP-8 12/16 ITU SSB carrier frequencies ITU RR Appendix AP-9 18/19, 22, 25/26 ITU SSB carrier frequencies ITU RR Appendix AP-10 MF band telex frequency table AP-11 AP-12 Frequency /4 AP-13 ITU Telex frequency /4 AP-14 ITU Telex Frequency /4 Telex Abbreviations AP-16 Digital Interface IEC SentencesAP-17 Input sentences IEC AP-18 GLL Geographic position latitude/longitudeZDA Time and date AP-19 GNS Gnss fix data AP-20 RMC Recommended minimum specific GPS/TRANSIT data Schematic diagram AP-21 Parts List AP-22Transceiver unit FS-1570T AP-23 Transceiver unit FS-2570T AP-24 Control unit FS-2571C AP-25 Control unit FS-5070T Parts Location FS-1570TAP-26 Transceiver unit FS-2570T AP-27 Transceiver unit FS-5070T AP-28 AP-29 Comb Control unit FS-2571C AP-30 Specifications of SSB Radiotelephone FS-1570/2570/5070 DSC/WATCH Keeping Receiver DSC/WATCH Receiver FS-5070 Nbdp Function Option Terminal Unit IB-581 FS-1570/2570 Antenna Coupler FS-1570/2570 Antenna Coupler FS-5070 Coating Color Index Distress relay IN-2 0560 Publication No. DOC-1028 0560