Furuno FS-5070 manual Receiving a geographical area call, Sending message by Nbdp Terminal Unit

5. ROUTINE MESSAGE CALLING, RECEVING

11.Rotate the ENTER knob to choose DSC frequency desired and then push the ENTER knob. (See “How to Set DSC Frequency” on page 5-4 for details.) Your display should now look something like one below.

Compose msg.

MSG TYPE	: AREA MESSAGE
AREA : 34°N 140°W ↓10° → 5°
PRIORITY	: SAFETY
COMM MODE	: TELEPHONE
COMM FREQ	: 2182.0 kHz
DSC FREQ	: 2187.5 kHz

GO TO VIEW

12.Press the CALL key to send the geographical area call (transmission time: about seven seconds). The display shows “Geographical area message in progress!” while the call is being sent.

Geographical area message in progress!

AREA: 34°N 140°W ↓10° → 5°

PRIORITY:		SAFETY
TELEPHONE		2182.0 kHz
DSC FREQ	:	2187.5 kHz
TIME TO GO	:	7S

13.After the call is sent, press the CANCEL key twice to show the radiotelephone screen.

14.If you chose TELEPHONE at step 8, you can now communicate with the other party. For NBDP, do the following:

Sending message by NBDP Terminal Unit

The message “STATION ENTRY COMPLETED FROM DSC. Press any key to escape.” Appears on the NBDP’s display.

1.Press any key on the NBDP Terminal Unit to erase the message.

2.Press the function key F3 on the keyboard of the NBDP Terminal Unit to show the Operate menu.

3.Choose “Call Station” and then press the Enter key.

4.“DSC” is selected; press the Enter key. “Connect” appears in reverse video.

5.Type and transmit your message.

6.When you have finished sending your message, press the F10 key to disconnect the line.

5.3.2Receiving a geographical area call

The alarm sounds and the display shows “Geographical area message received” when a geographical area message is received.

Geographical area message received.

CANCEL: STOP ALARM

PRIORITY: SAFETY

TELEPHONE 2182.0kHz

5-17