Furuno FS-5070 manual Safety Instructions

SAFETY INSTRUCTIONS

The user and installer must read the appropriate safety instructions before attempting to install or operate the equipment.

Indicates a hazardous situation which, if not avoided, will result in DANGER death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, WARNING could result in death or serious injury.

CAUTION	may result in minor or moderate injury.
	Indicates a potentially hazardous situation which, if not avoided,
Warning, Caution	Prohibitive Action	Mandatory Action

DANGER

Never touch the SSB antenna, antenna coupler or lead-in insulator when the SSB radiotelephone is transmitting.

High voltage which will cause death or serious injury is present at the locations shown in the illustration below when the SSB radiotelephone is transmitting.

	Antenna
Antenna Wire Indoor	Wire
(High Voltage)
Antenna	Lead-in
	Insulator
Coupler
	(High
	Voltage)

WARNING

Do not open the equipment.

Only qualified personnel should work inside the equipment.

Immediately turn off the power at the switchboard if water leaks into the equipment or something is dropped into the equipment.

Continued use of the equipment can cause fire or electrical shock. Contact a FURUNO agent for service.

Do not disassemble or modify the equipment.

Fire, electrical shock or serious injury can result.

ii

WARNING

Immediately turn off the power at the switchboard if the equipment is emitting smoke or fire.

Continued use of the equipment can cause fire or electrical shock. Contact a FURUNO agent for service.

Do not place liquid-filled containers on the top of the equipment.

Fire or electrical shock can result if a liquid spills into the equipment.

Do not operate the equipment with wet hands.

Electrical shock can result.

Turn off the power immediately

if you feel the equipment is behaving abnormally.

Turn off the power at the switchboard if the equipment becomes abnormally warm or is emitting odd noises. Contact a FURUNO dealer or agent for advice.

Make sure no rain or water splash leaks into the equipment.

Fire or electrical shock can result if water leaks in the equipment.

Use the proper fuse.

Use of the wrong fuse can cause fire or electrical shock.