Furuno FS-5070 manual Preparing TX Message, Deleting user channels, Preparing individual calls

6. MENU OPERATION

6.4.2Deleting user channels

Deleting individual user channels

1.Press the #/SETUP key.

2.Rotate the ENTER knob to choose USER CH and then push the ENTER knob twice.

3.Rotate the ENTER knob to choose CH and then push the ENTER knob.

4.Key in the channel number to be deleted, and then push the ENTER knob.

5.Tx and Rx frequencies are shown as “0.0 kHz”; push the ENTER knob to delete channel.

6.Press the CANCEL key twice to return to the radiotelephone screen.

Deleting all user channels

1.Press the #/SETUP key.

2.Rotate the ENTER knob to choose MEM CLR and then push the ENTER knob.

3.Rotate the ENTER knob to choose USER CHANNELS and then push the ENTER knob.

4.Rotate the ENTER knob to choose YES and then push the ENTER knob.

5.Press the CANCEL key twice to return to the radiotelephone screen.

6.5Preparing TX Message

For the individual, PSTN, Group and Test messages, you can create messages and store them in the memory for future use. You can recall these messages, for editing or sending, with the */FILE/CURSOR key. Maximum 100 messages can be stored into the memory.

6.5.1Preparing individual calls

1.Press the #/SETUP key to open the setup menu.

2.Rotate the ENTER knob to choose MESSAGE.

3.Push the ENTER knob.

4.Push the ENTER knob to open the MSG TYPE menu.

*Message file entry

MSG TYPE	INDIVIDUAL
STATION ID	PSTN MESSAGE
COMM MODE TEST MESSAGE
COMM FREQ	GROUP MESSAGE
DSC FREQ

5. Rotate the ENTER knob to choose INDIVIDUAL and then push the ENTER knob.

6-4