Opening the system

Depending on your purpose, you may need to remove only one or all of the system covers. Follow the instructions specific to the cover you want to remove, as indicated in each section.

Removing the side panel

You must remove the side panel before you can remove the bezel or the wrap-around panel.

To Remove the Side Panel
1.Disconnect all power cords. Unlock the chassis keylock if necessary.

2.On the rear of the system, remove the two screws that secure the side panel to the chassis. Save the screws (see Figure 1).

Figure 1: Removing the Side Panel

Caution!

Turn the system off and disconnect both power cords before proceeding. Installing any component while the power is on may cause permanent damage to the system.

System Access 3