4.Align the new Pentium II SEC cartridge in the Slot 2 supports and press it firmly into place until fully seated. See Figure 13.

Figure 13: Installing the New Processor

5.Place the lock bar over the top of the processor cartridge and secure it in place with the two screws provided.

6.Set the jumpers correctly for the new processor configuration.

7.Insert the new VRM into the connector provided until the release latches click into place.

8.Close the case, as described in “Closing the system” on page 7.

9.Reconnect the power cord and turn on the system.

Installing Components 31