•Supervisor Password: displays the status of the supervisor password. The options are Clear (no password entered) and Set (a password has been established). You cannot set this field directly.

•User Password: displays the status of the user password. The options are Clear (no password entered) and Set (a password has been established). You cannot set this field directly.

•Set Supervisor Password: opens the supervisor password dialog box. In this box, the supervisor can enter and verify the password used to control access to the Setup utility. If the supervisor password has already been set, the supervisor must enter the current password before entering and verifying the new password.

•Set User Password: opens the user password dialog box. In this box, you can enter and verify the password used to control access to the system. If the user password has already been set, you must enter the current password before you enter and verify the new password.

•Password on Boot: when this option is enabled, the system prompts you for a password before booting the system. The options are Enable and Disable.

•Fixed Disk Boot Sector: this field protects the boot sector from viruses. The options are Normal and Write Protect.

•Diskette Access: controls access to the diskette drive. The options include Supervisor (diskette drive is accessible only to the supervisor) and User (diskette drive is accessible to the user).

68 Maintaining and Troubleshooting the Gateway ALR 8300 Server