Gateway ALR 8300 Reinstalling the side panel, To Replace the Side Panel, Figure 6: Reinstalling the Side Panel, 4.Slide the panel forward until it is locked into place

2.Lower the panel and anchor its top edge to the chassis.

3.Gently release the panel so that its side is flush against the chassis.

4.Slide the panel forward until it is locked into place.

5.Secure the panel with the screws you removed when you removed the wrap-around panel.

Reinstalling the side panel

You must replace the bezel and the wrap-around panel before you replace the side panel.

To Replace the Side Panel

1.Align the panel with the chassis ledges just a few inches towards the back of the chassis. (See Figure 6.)

Figure 6: Reinstalling the Side Panel

Important!

-J XLI '137 LEW FIIR GSVVYTXIH F] E TS[IV SYXEKI ERH ]SY TPYK XLI W]WXIQ MRXS E TS[IV SYXPIX￿ MX [MPP TS[IV YT MQQIHMEXIP]￿ 8LMW MW RSVQEP￿

System Access 9