System Date: lets you set the system date. Use the format MM/DD/YYYY

Legacy Diskette A: allows you to select the type of diskette drive installed as drive A. The options are 360 kB, 5 ¼”; 1.2 MB, 5 ¼”; 720 kB, 3 ½”; 1.44/1.25 MB, 3 ½”;2.88 MB, 3 ½”; NOT INSTALLED; and DISABLED.

Legacy Diskette B: allows you to select the type of diskette drive installed as drive B. The options are 360 kB, 5 ¼”; 1.2 MB, 5 ¼”; 720 kB, 3 ½”; 1.44/1.25 MB, 3 ½”;2.88 MB, 3 ½”; NOT INSTALLED; and DISABLED.

Primary Master: opens the Primary Master screen to permit you to setup the primary master hard disk drive. Details of this screen are provided in the section “Hard disk drive setup screen” on page 57.

Primary Slave: opens the Primary Slave screen to permit you to setup the primary slave hard disk drive. Details of this screen are provided in the section “Hard disk drive setup screen” on page 57.

Secondary Master: opens the Secondary Master screen to permit you to setup the secondary master hard disk drive. Details of this screen are provided in the section “Hard disk drive setup screen” on page 57.

Secondary Slave: opens the Secondary Slave screen to permit you to setup the secondary slave hard disk drive. Details are provided in the section “Hard disk drive setup screen” on page 57.

System Memory: shows the amount of base system memory detected. This field is for reference only.

Extended Memory: shows the amount of extended memory detected. This field is for reference only.

56 Maintaining and Troubleshooting the Gateway ALR 8300 Server