I/O connectors

The I/O connectors are located on the back panel of the system. Figure 7 on page 12 shows the locations of the connectors on the system board. Figure 8 below shows the connectors as they appear on the back panel.

Serial port 1

 

Parallel port

Serial port 2

 

Keyboard port

Mouse port

Video port

 

Dual USB ports

RJ-45 Ethernet port with LED indicators

Figure 8: I/O ConnectorsThe following I/O connectors are included with the system:Two universal serial bus (USB) ports (AK in Figure 7):

USB ports provide connection for a growing list of peripheral components including mouse, keyboard, joystick, monitor, tape and floppy drives

As many as 127 devices can be daisy-chained from each port

Hot-swap capability and dynamic resource allocation for all peripherals attached

Data transfer rates of up to 12Mbps.

USB drivers are provided as a part of most major operating systems and should require no special procedures for implementation or use.

Two 9-pin 16550-compatible serial ports (AN and AP in Figure 7)One bi-directional ECP/EPP parallel port (AO in Figure 7)

Components 21