14.As the system starts up, verify that you have loaded the correct BIOS version.

15.Enter BIOS Setup by pressing F1 when prompted during startup. Once in BIOS Setup, press F5 and then re-enter the values you wrote down at the beginning of this process.

If you do not set the CMOS values back to the defaults using the F5 key or the correct values from your earlier configuration, the system may function erratically.

You may encounter a CMOS checksum error or other problem after the system restarts. If so, try turning the system off and then restarting. CMOS checksum errors require that you enter BIOS Setup, check your settings, save your settings, and exit setup.

BIOS Setup 73