Warning!

Do not attempt to service the system yourself except as explained elsewhere in the manual. Adjust only those controls covered in the instructions.

Opening or removing covers marked “Do Not Remove” may expose you to dangerous voltages or other risks.

Refer all servicing of those compartments to qualified service personnel.

Important!

The system power cord serves as the main disconnect for the computer. The wall outlet must be easily accessible by the operator.

Important Safety Instructions

Observe the following guidelines when performing any work on your system:•Follow all instructions marked on the server and in the documentation.

•Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

•Do not use this product near water. Do not spill liquid on or into the server.•Do not place the server on an unstable surface.

•Openings in the system cabinet are provided for ventilation. Do not block or cover these openings. Do not place the server near or upon a radiator or heat register.

•Use only the power source shown on the power supply. If you are not certain about the power source, ask the local power company.

•The server is equipped with a 3-wire grounding plug (a plug with a grounding pin). This plug only fits into a grounded power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace the outlet.

•Do not walk on the power cord or allow anything to rest on it.

•If you use an extension cord with this system, make sure the total ampere ratings on the products plugged into the extension cord do not exceed the extension cord ampere rating. Also, the total ampere requirements for all products plugged into the wall outlet must not exceed 15 amperes.

•Never insert objects of any kind into the system ventilation slots.

•Unplug the system from the wall outlet and refer servicing to qualified personnel if:

•The power cord or plug is damaged.•Liquid has been spilled into the system.

•The system does not operate properly when the operating instructions are followed.

•The system was dropped or the cabinet is damaged.•The system’s performance changes.

x Maintaining and Troubleshooting the Gateway ALR 9200 Server