Gateway ALR 9200 Setup Key Commands, Special Display Items, Function, Key Command, a few are not, Table 8 lists the keys commands available in Setup and what they do

Setup Key Commands

Table 8 lists the keys commands available in Setup and what they do.

Table 8: Setup Key Commands

Function	Key Command
Get general help	F1 or ATL+H
Move between menus	← →
Go to the previous item	¦ (colon)
Go to the next Item	Ø (zero)
Change the value of an item	+ or -
Select an item or display a submenu	ENTER
Leave a submenu or exit Setup	ESC
Reset to Setup defaults	F9
Save and exit Setup	F10

Special Display Items

Some items displayed on the screen do not behave as normal fields. These items are either submenus or display-only fields. Table 9 provides more information.

Table 9: Special Display Items

When you see this:	It means this:
On screen, an option is shown but	You cannot change or configure the option in that
you cannot select it or move to that	menu screen. Either the option is autoconfigured
field.	or autodetected, or you must use a different Setup
	screen, or you must use the SSU.
On screen, the phrase Press Enter	Press ENTER to display a submenu that is either a
appears next to the option.	separate full-screen menu or a pop-up menu with
	one or more choices.

The rest of this section lists the features that display on screen after you press F2 to enter Setup. Not all of the option choices are described, because

(1)a few are not user-selectable but are strictly informational, and (2) many of the choices are relatively self-explanatory.

84 Maintaining and Troubleshooting the Gateway ALR 9200 Server