5.Open the subchassis (see “Opening the Subchassis and Electronics Bay” on page 5) to gain access to the back of the 5.25-inch drive bay.

6.Remove the drive from its protective wrapper, and place it on an antistatic surface.

7.Set any jumpers or switches on the drive according to the drive manufacturer’s instructions.

8.Using two screws of the appropriate size and length (not supplied), attach each plastic slide rail (see Figure 17) with its metal grounding plate to the drive.

Slide rail

Tab on slide rail

Removable media device

Figure 17: Attaching the Slide Rails

9.Position the drive so the plastic slide rails engage in the bay guide rails. Push the drive into the bay until the slide rails lock in place.

10.Connect a power cable to the drive. The connectors are keyed and can be inserted in only one way.

Installing Hardware 51